Home › Engine / Hybrid System › 1NR-FE STARTING › ENGINE SWITCH › 2016.04–2017.10
RM30M0E _51 Engine / Hybrid System _053949 1NR-FE STARTING _0262382 ENGINE SWITCH A

1NR-FE STARTING  ENGINE SWITCH  REMOVAL  


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

Hide 55606 2.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

Hide 55432B 3.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)

Hide 55432B 4.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)

Hide 45287 5.REMOVE LOWER STEERING COLUMN COVER (for LHD)

Hide 89611 6.REMOVE ENGINE SWITCH (for LHD)

a.
A307903

Disengage the 2 claws to separate the engine switch from the No. 2 lower center instrument panel finish panel.


b.

Disconnect the engine switch connector to remove the engine switch.


Hide 89611 7.REMOVE ENGINE SWITCH (for RHD)

a.
A300054

Disengage the 2 claws to remove the engine switch from the lower instrument panel finish panel.