16363
1.INSTALL COOLING FAN MOTOR
Install the cooling fan motor to the fan shroud with the 3 screws.
16361
2.INSTALL FAN
Install the fan to the cooling fan motor with the nut.
16711
3.INSTALL FAN SHROUD
Engage the 2 guides and 2 claws to install the fan shroud to the radiator assembly.
Do not apply any excessive force to the radiator assembly when installing the fan shroud.
Engage the 3 clamps to connect the wire harness to the fan shroud.
Connect the cooling fan motor connector.
4.INSTALL NO. 3 RADIATOR HOSE
| *a | View A |
| *b | View B |
| *c | Hose Paint Mark |
| *d | Top of Vehicle |
| *e | Left Side of Vehicle |
Install the No. 3 radiator hose to the radiator assembly and water filler sub-assembly with the 2 hose clips.
Perform the installation with the No. 3 radiator hose and hose clips at the correct angle.
5.CONNECT RADIATOR RESERVOIR TANK HOSE
17701
6.INSTALL AIR CLEANER CASE SUB-ASSEMBLY (for Automatic Transaxle)
17701
7.INSTALL AIR CLEANER CASE SUB-ASSEMBLY (for Manual Transaxle)
17801
8.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY (for Automatic Transaxle)
17801
9.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY (for Manual Transaxle)
17735
10.INSTALL AIR CLEANER CAP WITH NO. 1 AIR CLEANER HOSE
17341T
11.CONNECT NO. 1 AIR HOSE (for Automatic Transaxle)
23827A
12.CONNECT NO. 2 FUEL VAPOR FEED HOSE
23820
13.CONNECT FUEL VAPOR FEED HOSE ASSEMBLY
89173
14.INSTALL FRONT AIRBAG SENSOR
15.ADD ENGINE COOLANT
16.INSPECT FOR COOLANT LEAK