83100
1.INSTALL COMBINATION METER ASSEMBLY
Connect the 2 connectors.
Engage the 2 guides and 2 clips to install the combination meter assembly.
Install the 2 screws.
Remove the protective cover (a piece of cloth or nylon).
55411G
2.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for LHD)
55411G
3.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL (for RHD)
55661A
4.INSTALL INSTRUMENT PANEL REGISTER BEZEL
5.CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. (for Hatchback)
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION