55046A
1.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
55045A
2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
33504F
3.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
33504F
4.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)
58821C
5.REMOVE UPPER CONSOLE PANEL (for Manual Transaxle)
6.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for CVT)
58921A
7.REMOVE REAR CONSOLE UPPER PANEL
85530
8.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
| *a | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the No. 1 power outlet socket assembly as shown in the illustration.
85535B
9.REMOVE NO. 1 POWER OUTLET SOCKET COVER
Disengage the 2 claws to remove the No. 1 power outlet socket cover.