Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR › from 2017.10
RM30M0E _58 Vehicle Interior _017117 SEAT BELT _0333431 OCCUPANT DETECTION SENSOR A

SEAT BELT  OCCUPANT DETECTION SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION

·

Wear protective gloves. Sharp areas on the parts may injure your hands.



NOTICE:

Always use "TORX" socket wrench E10 when removing the front seat.


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 72137 3.REMOVE OUTER SEAT TRACK BRACKET COVER

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY>REMOVAL


Hide 4.REMOVE FRONT SEAT ASSEMBLY

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY>REMOVAL


Hide 73230 5.REMOVE FRONT SEAT INNER BELT ASSEMBLY

Hide 72526A 6.REMOVE RECLINING ADJUSTER RELEASE HANDLE

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY>DISASSEMBLY


Hide 71812D 7.REMOVE FRONT SEAT CUSHION SHIELD

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY>DISASSEMBLY


Hide 71861 8.REMOVE FRONT SEAT CUSHION INNER SHIELD

Hide 9.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY>DISASSEMBLY


Hide 71511S 10.REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD

a.
B359988

Remove the 2 hog rings.


b.

for Type A:

i.
B448797

Remove the 17 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad (occupant detection sensor).



c.

for Type B:

i.
B448798

Remove the 21 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad (occupant detection sensor).