55606
1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMMIN Made)
55606
2.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMT Made)
for LHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>REMOVAL
for RHD:
Use the same procedure as for the LHD vehicle.
55432B
3.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for TMMIN Made)
55480D
4.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for TMT Made)
for LHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>REMOVAL
for RHD:
Use the same procedure as for the LHD vehicle.
5.REMOVE VSC OFF SWITCH (for TMT Made)
Disengage the 2 claws to remove the VSC OFF switch.
6.REMOVE VSC OFF SWITCH (for TMMIN Made)
for LHD:
Disengage the 2 claws to remove the VSC OFF switch.
for RHD:
Use the same procedure as for the LHD vehicle.