Home › Drivetrain › C50 MANUAL TRANSMISSION / TRANSAXLE › SHIFT LEVER ASSEMBLY › from 2017.10
RM30M0E _52 Drivetrain _017090 C50 MANUAL TRANSMISSION / TRANSAXLE _0091169 SHIFT LEVER ASSEMBLY A

C50 MANUAL TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY  REMOVAL  


PROCEDURE

Hide 58817A 3.REMOVE NO. 2 FRONT CONSOLE BOX INSERT

Hide 58839A 5.REMOVE CONSOLE BOX HOLE COVER

Hide 58810J 6.REMOVE CONSOLE BOX ASSEMBLY

Hide 33820B 7.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C283110C02
0.573,1.198 0.792,1.042 false 2.333,3.115 2.667,2.688 true 1.385,3.042 1.802,2.625 true 1.24,2.958 1.552,3.115 0.313,0.156 10 false *1 2.177,3.031 2.49,3.188 0.313,0.156 10 false *2 0.417,1.104 0.729,1.26 0.313,0.156 10 false *3
*1 Clip A
*2 Clip B
*3 Nut
V100135

Rotate approximately 180°


Remove the clip A to disconnect the select cable end of the transmission control cable assembly from the floor shift shift lever assembly.


b.

Widen the clip B to disconnect the shift cable end of the transmission control cable assembly from the floor shift shift lever assembly.


c.

Rotate the 2 nuts of the transmission control cable assembly approximately 180° in the direction shown in the illustration, and while holding the nut, separate the transmission control cable assembly from the floor shift shift lever assembly.

NOTICE:

Do not rotate the nut excessively as it may damage the internal spring and the transmission control cable assembly will not be reusable.



Hide 33530F 8.REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY

a.
C381218

Disengage the 2 clamps to separate the wire harness from the floor shift shift lever assembly.


b.

Remove the 4 bolts and floor shift shift lever assembly from the body.