1.INSTALL VSC OFF SWITCH (for TMMIN Made)
Engage the 2 claws to install the VSC OFF switch.
2.INSTALL VSC OFF SWITCH (for TMT Made)
for LHD:
Engage the 2 claws to install the VSC OFF switch.
for RHD:
Use the same procedure as for the LHD vehicle.
55480D
3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for TMT Made)
for LHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>INSTALLATION
for RHD:
Use the same procedure as for the LHD vehicle.
55432B
4.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for TMMIN Made)
55606
5.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMMIN Made)