55301
1.REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
55950G
2.REMOVE DEFROSTER NOZZLE ASSEMBLY
for Automatic Air Conditioning System:
Disconnect the connector.
Remove the 3 screws.
Disengage the 3 guides to remove the defroster nozzle assembly.
55085
3.REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY (for LHD)
55084E
4.REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (for RHD)
86101
5.REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)
Disengage the 4 clamps and 3 guides to remove the antenna cord sub-assembly.
| *a | Clamp | *b | Guide |
86101
6.REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)
Disengage the 3 clamps and 3 guides to remove the antenna cord sub-assembly.
| *a | Clamp | *b | Guide |
63310
7.REMOVE ROOF HEADLINING ASSEMBLY
86101J
8.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY
Remove the 8 adhesive tapes.
| *a | Cutout | - | - |
|
Adhesive Tape |
|
Front |
Remove the No. 2 antenna cord sub-assembly from the cutout of the roof headlining assembly.