Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) › from 2017.10
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0087455 HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)  REMOVAL  


PROCEDURE

Hide 53601 1.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.
B470630

Disengage the claw and the 3 guides.


b.
B483936

Disengage the guide.


c.

Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.


Hide 2.REMOVE FRONT WHEEL RH

Hide 53875A 3.REMOVE FRONT FENDER LINER RH

HINT:

Use the same procedure as for the LH side.

Click hereDrivetrain>AXLE AND DIFFERENTIAL>FRONT AXLE HUB>REMOVAL


Hide 53141F 5.REMOVE RADIATOR COVER (for Hatchback)

Hide 53510 6.REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)

Hide 53510 7.REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch)

a.
B341593

Remove the 3 bolts.


b.
B483937

Disengage the guide and disconnect the hood lock control cable assembly, and remove the hood lock assembly.


Hide 53630 8.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

a.

Disengage the hood lock control cable assembly from the 3 clamps as shown in the illustration.

B470631C01
1.729,5.156 1.396,5.156 false 1.563,0.792 1.25,0.5 true 2.125,1.302 1.802,1.302 false 1.385,3.146 1.198,2.958 false 0.76,3.031 1.094,2.865 true 1.271,5.25 1.563,5.49 true 5.833,0.802 5.604,0.896 false 6.542,0.75 6.302,0.979 false 0.594,2.958 0.906,3.156 0.313,0.198 10 false *1 1.438,3.073 1.75,3.271 0.313,0.198 10 false *a 1.771,5.052 2.083,5.25 0.313,0.198 10 false *a 1.604,5.417 1.917,5.615 0.313,0.198 10 false *1 2.188,1.219 2.438,1.417 0.25,0.198 10 false *a 1.063,0.417 1.375,0.615 0.313,0.198 10 false *1 5.427,0.823 5.677,1.021 0.25,0.198 10 false *b 6.573,0.646 6.885,0.844 0.313,0.198 10 false *1
*1 Hood Lock Control Cable Assembly - -
*a Clamp *b Grommet



b.

Disengage the grommet and remove the hood lock control cable assembly.