1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
81150
2.REMOVE HEADLIGHT ASSEMBLY LH
81110
3.REMOVE HEADLIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
89173
4.REMOVE FRONT AIRBAG SENSOR
53510
5.REMOVE HOOD LOCK ASSEMBLY
53208A
6.REMOVE HOOD LOCK SUPPORT
88891H
7.REMOVE NO. 1 COOLER COVER
53216A
8.REMOVE UPPER RADIATOR SUPPORT
88711
9.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88706A
10.DISCONNECT LIQUID TUBE SUB-ASSEMBLY A
Remove the bolt and disconnect the liquid tube sub-assembly A from the cooler condenser assembly.
Remove the O-ring from the liquid tube sub-assembly A.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88460
11.REMOVE COOLER CONDENSER ASSEMBLY
Disengage the 2 claws.
Do not damage the cooler condenser assembly or radiator assembly when removing the condenser with receiver assembly.
Disengage the 2 guides to remove the cooler condenser assembly as shown in the illustration.