Home › Vehicle Exterior › LIGHTING (EXT) › SWITCH HOUSING › 2020.03–2020.07
RM36W0E _59 Vehicle Exterior _087824 LIGHTING (EXT) _0421023 SWITCH HOUSING A

LIGHTING (EXT)  SWITCH HOUSING  REMOVAL  


PROCEDURE

Hide 84306 1.REMOVE SPIRAL CABLE SUB-ASSEMBLY

Hide 84650 2.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

Hide 84329 3.REMOVE TURN SIGNAL SWITCH

Hide 84319 4.REMOVE STEERING WHEEL SWITCH HOUSING

a.
E441613

Using pliers, expand the clamp as shown in the illustration.


b.
E433443C02
1.896,0.302 2.167,0.5 true 1.667,0.167 1.917,0.417 0.25,0.25 10 true *a
*a Protective Tape
V113147

Remove in this Direction


While holding the clamp expanded, using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the steering wheel switch housing as shown in the illustration.