Home › Engine / Hybrid System › M15A-FKS (LUBRICATION) › OIL LEVEL SENSOR
RM36W0E _51 Engine / Hybrid System _088717 M15A-FKS LUBRICATION _0422236 OIL LEVEL SENSOR A

M15A-FKS LUBRICATION  OIL LEVEL SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 51451A 1.REMOVE CENTER ENGINE UNDER COVER

Hide 89491 4.REMOVE ENGINE OIL LEVEL SENSOR

a.

Disconnect the engine oil level sensor connector.


b.
A463124

Remove the clip from the engine oil level sensor.


c.
A463125

Using an 8 mm socket wrench, remove the 2 bolts and engine oil level sensor from the stiffening crankcase assembly.