Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER › 2020.03–2020.07
RM36W0E _58 Vehicle Interior _088019 HEATING / AIR CONDITIONING _0424503 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 86520 2.REMOVE LOW PITCHED HORN ASSEMBLY

Hide 52611 4.REMOVE FRONT BUMPER ENERGY ABSORBER

Hide 52131A 5.REMOVE FRONT BUMPER REINFORCEMENT

Hide 16681A 6.REMOVE RADIATOR UPPER AIR GUIDE PLATE

Hide 16562L 7.REMOVE NO. 2 RADIATOR TO SUPPORT SEAL

Hide 16595D 8.REMOVE NO. 1 RADIATOR AIR GUIDE LH

Hide 16561D 9.REMOVE NO. 1 RADIATOR TO SUPPORT SEAL

Hide 53036C 10.REMOVE FRONT END PANEL MOUNTING BRACKET SUB-ASSEMBLY LH

a.
I116277

Remove the bolt.


b.

Disengage the guides to remove the front end panel mounting bracket sub-assembly LH.


Hide 53035C 11.REMOVE FRONT END PANEL MOUNTING BRACKET SUB-ASSEMBLY RH

a.
I116278

Disengage the guides to remove the front end panel mounting bracket sub-assembly RH.


Hide 88703 12.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

a.
I115603

Remove the bolt to disconnect the discharge hose sub-assembly from the cooler condenser assembly.


b.

Remove the O-ring from the discharge hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88716A 13.DISCONNECT COOLER REFRIGERANT LIQUID PIPE A

a.
I115604

Remove the bolt to disconnect the cooler refrigerant liquid pipe A from the cooler condenser assembly.


b.

Remove the O-ring from the cooler refrigerant liquid pipe A.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88460 14.REMOVE COOLER CONDENSER ASSEMBLY

a.
I116279C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Disengage the claws and guides to remove the cooler condenser assembly as shown in the illustration.

NOTICE:

Do not damage the cooler condenser assembly or radiator assembly when removing the cooler condenser assembly.