11301C
1.INSTALL TIMING CHAIN COVER OIL SEAL
Apply MP grease to the lip of a new timing chain cover oil seal.
Keep the lip free from foreign matter.
Do not allow MP grease to contact the dust seal.
Using SST and a hammer, tap in the timing chain cover oil seal.
| *a | 0 to 2 mm | - | - |
0 to 2 mm (0 to 0.0787 in.) (From the edge of the No. 2 timing chain cover assembly)
Do not tap in the timing chain cover oil seal at an angle.
13470
2.INSTALL CRANKSHAFT PULLEY ASSEMBLY
16361A
3.INSTALL FAN AND GENERATOR V BELT
4.INSPECT FOR OIL LEAK
51441C
5.INSTALL ENGINE UNDER COVER RH
51451A
6.INSTALL CENTER ENGINE UNDER COVER
7.INSTALL FRONT WHEEL RH