Home › Engine / Hybrid System › M15A-FXE (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL
RM36W0E _51 Engine / Hybrid System _089412 M15A-FXE ENGINE MECHANICAL _0424636 FRONT CRANKSHAFT OIL SEAL A

M15A-FXE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11301C 1.INSTALL TIMING CHAIN COVER OIL SEAL

a.

Apply MP grease to the lip of a new timing chain cover oil seal.

NOTICE:
·

Keep the lip free from foreign matter.

·

Do not allow MP grease to contact the dust seal.




b.

Using SST and a hammer, tap in the timing chain cover oil seal.

SST
09223-00010  

A460239C01
1.208,0.948 1.708,0.948 false 5.24,0.198 5.698,0.396 0.458,0.198 10 false *a 0.896,0.865 1.354,1.063 0.458,0.198 10 false SST
*a 0 to 2 mm - -


Standard Depth:

0 to 2 mm (0 to 0.0787 in.) (From the edge of the No. 2 timing chain cover assembly)


NOTICE:

Do not tap in the timing chain cover oil seal at an angle.



Hide 13470 2.INSTALL CRANKSHAFT PULLEY ASSEMBLY

Hide 51441C 4.INSTALL ENGINE UNDER COVER RH

Hide 51451A 5.INSTALL CENTER ENGINE UNDER COVER

Hide 6.INSTALL FRONT WHEEL RH