23221
1.INSTALL FUEL PUMP
Perform "Inspection After Repair" after replacing the fuel pump.
Click hereEngine / Hybrid System>1KR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION
| *1 | O-ring |
| *2 | Fuel Pump Spacer |
Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.
Engage the 3 claws to install the fuel pump to the No. 1 fuel suction support.
Make sure that the O-ring is not cut or pinched during the installation.
Securely engage the clamp and claw.
Engage the 4 claws to install the fuel pump to the fuel sub-tank sub-assembly.
| *a | Protrusion |
| *b | Installation Hole |
|
Slide |
Align the protrusion of the fuel sub-tank sub-assembly with the installation hole of the fuel suction plate sub-assembly and then slide the fuel suction plate sub-assembly to install the fuel sub-tank sub-assembly.
Engage the clamp and connect the fuel pump harness to the fuel suction tube with pump and gauge assembly.
Do not damage the wire harness.
When engaging each wire harness to the clamp, engage one wire at a time.
Connect the 2 fuel pump harness connectors.
83320
2.INSTALL FUEL SENDER GAUGE ASSEMBLY