Home › Engine / Hybrid System › M15A-FXE (EMISSION CONTROL) › EGR VALVE › from 2020.07
RM36W0E _51 Engine / Hybrid System _088663 M15A-FXE EMISSION CONTROL _0427223 EGR VALVE A

M15A-FXE EMISSION CONTROL  EGR VALVE  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 25627 1.INSTALL EGR VALVE GASKET

a.
A463780C01
1.292,0.854 0.833,1.5 0.833,1.5 1.75,1.417 true 1.625,0.688 2.417,0.667 2.417,0.667 2.083,1.167 true 0.667,1.417 0.979,1.573 0.313,0.156 10 false *a 2.469,0.573 2.781,0.729 0.313,0.156 10 false *a
*a Claw


Install a new EGR valve gasket to the EGR valve assembly.

NOTICE:

Make sure that the claws of the EGR valve gasket are toward the EGR valve assembly side.



Hide 25620 2.INSTALL EGR VALVE ASSEMBLY

HINT:

Perform "Inspection After Repair" after replacing the EGR valve assembly

Click hereEngine / Hybrid System>M15A-FXE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Install the EGR valve assembly to the EGR cooler assembly with the 2 bolts.

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


Hide 25634 3.INSTALL EGR PIPE GASKET

a.
A463781C01
1.573,0.917 1.021,1.219 1.021,1.219 1.594,1.406 true 1.865,0.906 2.469,1.188 2.469,1.188 1.885,1.396 true 0.792,1.115 1.01,1.302 0.219,0.188 10 true *a 2.5,1.104 2.719,1.292 0.219,0.188 10 true *a
*a Claw


Install a new EGR pipe gasket to EGR valve adapter.

NOTICE:

Make sure that the claws of the EGR pipe gasket are toward the EGR adapter side.



Hide 25685 4.INSTALL NO. 1 EGR COOLER GASKET

Hide 5.INSTALL EGR VALVE WITH EGR COOLER ASSEMBLY

a.

Install the EGR valve with EGR cooler assembly to the bolts and nuts.

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


b.

Connect the EGR valve assembly connector.


c.

Connect the wire harness clamp.


d.

Install the No. 4 water by-pass hose to the EGR valve assembly and slide the clip to secure it.


e.

Install the No. 3 water by-pass hose to the EGR valve assembly and slide the clip to secure it.


f.

Install the No. 5 water by-pass hose to the EGR valve assembly and slide the clip to secure it.


Hide G9200 6.INSTALL INVERTER WITH CONVERTER ASSEMBLY

Hide 51451A 9.INSTALL CENTER ENGINE UNDER COVER (w/ Center Under Cover Full Cover Type)