Home › Engine / Hybrid System › 1KR-FE (COOLING) › THERMOSTAT › from 2020.07
RM36W0E _51 Engine / Hybrid System _091037 1KR-FE COOLING _0431358 THERMOSTAT A

1KR-FE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new gasket onto the thermostat.


b.
A104297C05
1.021,1.083 1.771,1.594 true 2.104,0.104 2.406,0.406 false 1.823,1.552 2.01,1.74 0.188,0.188 10 false *b 1.906,0.01 2.094,0.198 0.188,0.188 10 false *a
*a Upper Indication
*b Jiggle Pin


Install the thermostat into the water inlet with the jiggle pin facing straight upward.


Hide 16321 2.INSTALL WATER INLET

a.

Install the water inlet with the 2 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)

NOTICE:
·

Avoid catching the rubber gasket of the thermostat under the water inlet.


·

Do not use a water inlet that has been dropped.


·

Ensure that the gasket is secured between the water inlet and block.




Hide 16572D 3.CONNECT NO. 2 RADIATOR HOSE

a.

Connect the No. 2 radiator hose to the water inlet and slide the clip to secure it.


Hide 4.INSTALL AIR CLEANER ASSEMBLY WITH DUCT

Hide 5.ADD ENGINE COOLANT