Home › Engine / Hybrid System › 1KR-FE (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR › from 2020.07
RM36W0E _51 Engine / Hybrid System _091054 1KR-FE ENGINE CONTROL _0431476 ENGINE COOLANT TEMPERATURE SENSOR A

1KR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89422 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

a.

Install a new gasket to the engine coolant temperature sensor.


b.

Using a 19 mm deep socket wrench, install the engine coolant temperature sensor to the cylinder head sub-assembly.

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)

NOTICE:

If the engine coolant temperature sensor has been struck or dropped, replace it.