1.INSTALL PARKING BRAKE SWITCH ASSEMBLY
Install the parking brake switch assembly with the screw.
46201E
2.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.
Bend down the parking brake lever sub-assembly claw.
Do not damage the No. 1 parking brake cable assembly.
Install the parking brake equalizer with a new No. 1 wire adjusting nut.
Install the parking brake lever sub-assembly with the 2 bolts.
Connect the parking brake switch connector.
3.CONNECT PARKING BRAKE CABLE ASSEMBLY
Connect the No. 3 parking brake cable assembly to the parking brake equalizer as shown in the illustration.
58996A
4.INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET (except Gasoline Model TMMF made)
Install the No. 2 console box mounting bracket with the 4 bols.
5.ADJUST PARKING BRAKE LEVER TRAVEL
6.INSPECT BRAKE WARNING LIGHT
58910C
7.INSTALL REAR CONSOLE BOX ASSEMBLY
58903A
8.INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY (for Gasoline Model TMMF Made)