1.SECURE VEHICLE
Fully apply the parking brake and chock a wheel.
Make sure to apply the parking brake and chock a wheel before performing this procedure.
If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
58910C
2.REMOVE REAR CONSOLE BOX ASSEMBLY
3.ADJUST SHIFT LEVER POSITION
Before adjusting the transmission control cable assembly, check that the shift lever position sensor and shift lever are in N.
| *1 | Adjuster Case |
| *2 | Adjuster Case Cover |
Slide the adjuster case cover in the direction shown by the arrow.
| *1 | Adjuster Case |
| *2 | Lock Piece |
Using a precision screwdriver, pull out the lock piece of the adjuster case.
| *1 | Lock Piece |
| *2 | Adjuster Case |
Push in the lock piece of the adjuster case to lock it.
| *1 | Transmission Control Cable Assembly |
| *2 | Lever Shaft |
When pushing in the lock piece of the adjuster case to lock it, remove your hand from the lever shaft.
When pushing in the lock piece of the adjuster case to lock it, do not move the lever shaft or transmission control cable assembly forward or backward.
| *1 | Adjuster Case |
| *2 | Adjuster Case Cover |
Move the adjuster case cover in the direction shown by the arrow.
If the adjuster case cover is not moved far enough so that the adjuster case cover engages the lock piece, the cable will not be able to lock, and reliable shift operation will not be possible.
58910C
4.INSTALL REAR CONSOLE BOX ASSEMBLY