Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMMF Made) › 2020.07–2021.11
RM36W0E _54 Brake _088016 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0432441 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMMF Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMMF Made)  C143A7E  ABS Solenoid Control Module Actuator Stuck On  C143A7F  ABS Solenoid Control Module Actuator Stuck Off  


DESCRIPTION

The ABS solenoid relay is built into the skid control ECU in the brake actuator assembly. The ABS solenoid relay supplies power to each solenoid.

The skid control ECU (brake actuator assembly) detects an ABS solenoid relay malfunction by performing a self-check and relay operation check.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
C143A7E ABS Solenoid Control Module Actuator Stuck On When an ABS solenoid relay OFF request is sent, the ABS solenoid relay remains ON for 0.08 second or more. Skid control ECU (brake actuator assembly) Brake
C143A7F ABS Solenoid Control Module Actuator Stuck Off When an ABS solenoid relay ON request is sent, the ABS solenoid relay remains OFF for 0.08 second or more. Skid control ECU (brake actuator assembly) Brake

CAUTION / NOTICE / HINT

NOTICE:

After replacing the skid control ECU (brake actuator assembly), perform yaw rate and acceleration sensor zero point calibration and store system information memorization.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMMF Made)>UTILITY


PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check the vehicle specification.


Result:
Result Proceed to
LHD A
RHD B



A

REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)

B