Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMMF Made) › 2020.07–2021.11
RM36W0E _54 Brake _088016 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0432441 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMMF Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMMF Made)  C14F11C  Brake Pressure Control Solenoid "C" Control Circuit Voltage Out of Range  C14F149  Brake Pressure Control Solenoid "C" Control Internal Electronic Failure  C14FA1C  Brake Pressure Control Solenoid "D" Control Circuit Voltage Out of Range  C14FA49  Brake Pressure Control Solenoid "D" Control Internal Electronic Failure  


DESCRIPTION

The ABS solenoid relay and reservoir cut solenoid valves are built into the brake actuator assembly.

When the brakes are operating, the reservoir cut solenoid valves supply brake fluid from the brake master cylinder reservoir assembly to the pump motor as necessary.

When these DTCs are stored, the fail-safe function operates and the ABS solenoid relay is turned off to prevent the reservoir cut solenoid valves from operating.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
C14F11C Brake Pressure Control Solenoid "C" Control Circuit Voltage Out of Range
·

A current leak in the reservoir cut solenoid circuit is detected during the self test.

·

The reservoir cut solenoid valve operation request signal and reservoir cut solenoid valve operation feedback signal do not match for a certain period of time.


Skid control ECU (brake actuator assembly) Brake
C14F149 Brake Pressure Control Solenoid "C" Control Internal Electronic Failure An internal malfunction in the reservoir cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C14FA1C Brake Pressure Control Solenoid "D" Control Circuit Voltage Out of Range
·

A current leak in the reservoir cut solenoid circuit is detected during the self test.

·

The reservoir cut solenoid valve operation request signal and reservoir cut solenoid valve operation feedback signal do not match for a certain period of time.


Skid control ECU (brake actuator assembly) Brake
C14FA49 Brake Pressure Control Solenoid "D" Control Internal Electronic Failure An internal malfunction in the reservoir cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake

CAUTION / NOTICE / HINT

NOTICE:

After replacing the skid control ECU (brake actuator assembly), perform yaw rate and acceleration sensor zero point calibration and store system information memorization.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMMF Made)>UTILITY


PROCEDURE

1.CHECK VEHICLE TYPE
a.

Check the vehicle specification.


Result:
Result Proceed to
LHD A
RHD B



A

REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)

B