1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
for HFC-134a(R134a):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFC-134a(R134a))>REPLACEMENT
for HFO-1234yf(R1234yf):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFO-1234yf(R1234yf))>REPLACEMENT
86520
2.REMOVE LOW PITCHED HORN ASSEMBLY
Click hereVehicle Exterior>HORN>HORN>REMOVAL
53510
3.REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)
53510
4.REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch)
52611
5.REMOVE FRONT BUMPER ENERGY ABSORBER
52131A
6.REMOVE FRONT BUMPER REINFORCEMENT
16681A
7.REMOVE RADIATOR UPPER AIR GUIDE PLATE
16562L
8.REMOVE NO. 2 RADIATOR TO SUPPORT SEAL (w/ Engine Under Cover Assembly)
16595D
9.REMOVE NO. 1 RADIATOR AIR GUIDE LH
16561D
10.REMOVE NO. 1 RADIATOR TO SUPPORT SEAL (w/ Engine Under Cover Assembly)
53036C
11.REMOVE FRONT END PANEL MOUNTING BRACKET SUB-ASSEMBLY LH
Remove the bolt.
Disengage the guides to remove the front end panel mounting bracket sub-assembly LH.
53035C
12.REMOVE FRONT END PANEL MOUNTING BRACKET SUB-ASSEMBLY RH
Disengage the guides to remove the front end panel mounting bracket sub-assembly RH.
88711
13.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt to disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88716A
14.DISCONNECT COOLER REFRIGERANT LIQUID PIPE A (except 1KR-FE)
Remove the bolt to disconnect the cooler refrigerant liquid pipe A from the cooler condenser assembly.
Remove the O-ring from the cooler refrigerant liquid pipe A.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88710E
15.DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY (for 1KR-FE)
Remove the bolt to disconnect the air conditioner tube and accessory assembly from the cooler condenser assembly.
Remove the O-ring from the air conditioner tube and accessory assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
884A0
16.REMOVE COOLER CONDENSER ASSEMBLY
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the claws and guides to remove the cooler condenser assembly as shown in the illustration.
Do not damage the cooler condenser assembly or radiator assembly when removing the cooler condenser assembly.