The ABS motor relay and pump motor are built into the brake actuator assembly.
If the skid control ECU (brake actuator assembly) detects a malfunction in the drive circuit of the pump motor, this DTC is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| C052C49 | ABS Pump Motor Control Internal Electronic Failure | ·
The skid control ECU (brake actuator assembly) detects a malfunction in the pump motor circuit. ·
When the system has started, a short to +B is detected during the ABS motor drive circuit self test. |
Skid control ECU (brake actuator assembly) | Brake |
After replacing the skid control ECU (brake actuator assembly), perform yaw rate and acceleration sensor zero point calibration and store system information memorization.
Check the vehicle specification.
| Result | Proceed to |
|---|---|
| LHD | A |
| RHD | B |
A
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>BRAKE ACTUATOR (for Gasoline Model LHD)>REMOVAL
B