Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › 2020.07–2021.11
RM36W0E _58 Vehicle Interior _089448 PRE-COLLISION _0424816 PRE-COLLISION SYSTEM C

PRE-COLLISION  PRE-COLLISION SYSTEM  C142571  Stop Light Relay Actuator Stuck  


DESCRIPTION

for Gasoline Model:

The stop light switch and skid control ECU (brake actuator assembly) output stop light signals. If the skid control ECU (brake actuator assembly) detects a malfunction in circuits related to the stop light, it informs the millimeter wave radar sensor assembly via CAN communication, and DTC C142571 is stored.

for HV Model:

The stop light switch and skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2 output stop light signals. If the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2 detects a malfunction in circuits related to the stop light, it informs the millimeter wave radar sensor assembly via CAN communication, and DTC C142571 is stored.

*1: for TMC Made

*2: for TMMF Made


DTC No. Detection Item DTC Detection Condition Trouble Area
C142571 Stop Light Relay Actuator Stuck for Gasoline Model:
When the ignition switch is ON for 3 seconds or more, a stop light circuit malfunction signal is received from the skid control ECU (brake actuator assembly) for 1 second or more.
for HV Model:
When the ignition switch is ON for 3 seconds or more, a stop light circuit malfunction signal is received from the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2 for 1 second or more.
Electronically controlled brake system

*1: for TMC Made

*2: for TMMF Made


PROCEDURE

1.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for Gasoline Model A
for HV Model B



A

2.CONFIRM MODEL

B

5.CONFIRM MODEL
2.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for TMC Made A
for TMMF Made B



A

3.INSPECT ELECTRONICALLY CONTROLLED BRAKE SYSTEM

B

4.INSPECT ELECTRONICALLY CONTROLLED BRAKE SYSTEM
3.INSPECT ELECTRONICALLY CONTROLLED BRAKE SYSTEM
HINT:

If DTC C142571 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMC Made)>HOW TO PROCEED WITH TROUBLESHOOTING


Result:
Proceed to
NEXT



NEXT

END

4.INSPECT ELECTRONICALLY CONTROLLED BRAKE SYSTEM
HINT:

If DTC C142571 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMMF Made)>HOW TO PROCEED WITH TROUBLESHOOTING


Result:
Proceed to
NEXT



NEXT

END

5.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for TMC Made A
for TMMF Made B



A

6.INSPECT ELECTRONICALLY CONTROLLED BRAKE SYSTEM

B

7.INSPECT ELECTRONICALLY CONTROLLED BRAKE SYSTEM
6.INSPECT ELECTRONICALLY CONTROLLED BRAKE SYSTEM
HINT:

If DTC C142571 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMC Made)>HOW TO PROCEED WITH TROUBLESHOOTING


Result:
Proceed to
NEXT



NEXT

END

7.INSPECT ELECTRONICALLY CONTROLLED BRAKE SYSTEM
HINT:

If DTC C142571 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMMF Made)>HOW TO PROCEED WITH TROUBLESHOOTING


Result:
Proceed to
NEXT



NEXT

END