Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMMF Made) › 2020.07–2021.11
RM36W0E _54 Brake _088016 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0435240 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model TMMF Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model TMMF Made)  C052096  Multi-axis Acceleration Sensor Module "A" Component Internal Failure  


DESCRIPTION

The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition.

The skid control ECU (brake actuator assembly) receives signals from the yaw rate and acceleration sensor (airbag sensor assembly) via CAN communication.

HINT:
These DTCs may be stored if one of the following occurs:
·

Yaw rate and acceleration sensor (airbag sensor assembly) installation abnormality.

·

Yaw rate and acceleration sensor signal malfunction.



DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
C052096 Multi-axis Acceleration Sensor Module "A" Component Internal Failure
·

When the vehicle is being driven, the offset of the acceleration sensor is less than -2.25 m/s2 or more than 2.25 m/s2.

·

With the +BS terminal voltage between 9.6 and 16.5 V, an acceleration sensor internal malfunction signal is received from the acceleration sensor (airbag sensor assembly).

·

The value (Forward and rearward G) of the acceleration sensor is less than -14.6 m/s2 or more than 14.6 m/s2 for 3 seconds or more.

·

When the vehicle is stopped, the value (lateral) of the acceleration sensor is less than -7 m/s2 or more than 7 m/s2 for 0.4 seconds or more.

·

The value (lateral) of the acceleration sensor is less than -14.6 m/s2 or more than 14.6 m/s2 for 0.8 seconds or more.


·

Acceleration sensor (airbag sensor assembly) installation

·

Acceleration sensor (airbag sensor assembly)


Brake

CAUTION / NOTICE / HINT

NOTICE:

After replacing or reinstalling the yaw rate and acceleration sensor (airbag sensor assembly), perform acceleration sensor zero point calibration and store system information memorization after performing "Reset Memory".

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMMF Made)>UTILITY


PROCEDURE

1.CHECK FREEZE FRAME DATA (LATERAL G AND FORWARD AND REARWARD G)
a.

Select a DTC to display the Freeze Frame Data.


b.

Read the freeze frame data of DTC C052096.

Chassis > Brake
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Lateral G Lateral G Min.: -25.105 m/s2, Max.: 24.908 m/s2 Turning right: -25.105 to 0.000 m/s2
Turning left: 0.000 to 24.908 m/s2
During turning: Changes in proportion with lateral acceleration
Forward and Rearward G Forward and rearward G Min.: -25.105 m/s2, Max.: 24.908 m/s2 During deceleration: -25.105 to 0.000 m/s2
During acceleration: 0.000 to 24.908 m/s2
During acceleration/deceleration: Changes in proportion with acceleration
Chassis > Brake > DTC(C052096) > Freeze Frame Data
Tester Display
Lateral G
Forward and Rearward G
50040 435 25,26 C052096

Result:
Result Proceed to
The value of Lateral G or Forward and rearward G is less than -14.6 m/s2 or more than 14.6 m/s2. A
Other than above. B



A

B

2.CHECK FREEZE FRAME DATA (LATERAL G AND VEHICLE SPEED)
2.CHECK FREEZE FRAME DATA (LATERAL G AND VEHICLE SPEED)
a.

Select a DTC to display the Freeze Frame Data.


b.

Read the freeze frame data of DTC C052096.

Chassis > Brake
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Lateral G Lateral G Min.: -25.105 m/s2, Max.: 24.908 m/s2 Turning right: -25.105 to 0.000 m/s2
Turning left: 0.000 to 24.908 m/s2
During turning: Changes in proportion with lateral acceleration
Vehicle Speed Vehicle speed (vehicle speed used for each control) Min.: 0.0 km/h (0 mph), Max.: 6553.5 km/h (4072 mph) Vehicle stopped: 0.0 km/h (0.0 mph) When driving at constant speed: No large fluctuations
Chassis > Brake > DTC(C052096) > Freeze Frame Data
Tester Display
Lateral G
Vehicle Speed
50040 435 25,51 C052096

Result:
Result Proceed to
The value of Vehicle speed is 0 km/h (0 mph) and the value of Lateral G is less than -7 m/s2 or more than 7 m/s2. A
Other than above. B



A

B

3.CHECK AIRBAG SENSOR ASSEMBLY INSTALLATION
3.CHECK AIRBAG SENSOR ASSEMBLY INSTALLATION
a.

Check that the yaw rate and acceleration sensor (airbag sensor assembly) has been installed properly.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>CENTER AIRBAG SENSOR ASSEMBLY>INSTALLATION

OK:

The yaw rate and acceleration sensor (airbag sensor assembly) is tightened to the specified torque.

The yaw rate and acceleration sensor (airbag sensor assembly) is not installed in a tilted position.



Result:
Proceed to
OK
NG



OK

NG