The skid control ECU (brake actuator assembly) stores this DTC if malfunctions are found in a circuit inside the ECU by self diagnosis.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| C059704 | Brake System Control Module "A" System Internal Failure | Internal failure of the skid control ECU (brake actuator assembly). | Skid control ECU (brake actuator assembly) | Brake |
After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.
Choose the model to be inspected.
| Result | Proceed to |
|---|---|
| for RHD | A |
| for LHD | B |
A
B
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>BRAKE ACTUATOR (for HV Model TMMF Made RHD)>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>BRAKE ACTUATOR (for HV Model LHD)>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT