Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMMF Made) › 2020.07–2021.11
RM36W0E _54 Brake _088016 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0435240 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model TMMF Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model TMMF Made)  C12D112  Left Rear Wheel ABS Hold Solenoid Control Circuit Short to Battery  C12D114  Left Rear Wheel ABS Hold Solenoid Control Circuit Short to Ground or Open  C12D11C  Left Rear Wheel ABS Hold Solenoid Control Circuit Voltage Out of Range  C12D11E  Left Rear Wheel ABS Hold Solenoid Control Circuit Resistance Out of Range  C12D149  Left Rear Wheel ABS Hold Solenoid Control Internal Electronic Failure  C12DC12  Left Rear Wheel ABS Release Solenoid Control Circuit Short to Battery  C12DC14  Left Rear Wheel ABS Release Solenoid Control Circuit Short to Ground or Open  C12DC1C  Left Rear Wheel ABS Release Solenoid Control Circuit Voltage Out of Range  C12DC1E  Left Rear Wheel ABS Release Solenoid Control Circuit Resistance Out of Range  C12DC49  Left Rear Wheel ABS Release Solenoid Control Internal Electronic Failure  


DESCRIPTION

The ABS solenoid relay and solenoid valves are built into the brake actuator assembly.

The rear solenoid valve LH controls the brake fluid pressure of the rear wheel cylinder LH of the vehicle.

When this DTC is stored, the fail-safe function operates and the ABS solenoid relay is turned off to prevent the solenoid valves from operating.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
C12D112 Left Rear Wheel ABS Hold Solenoid Control Circuit Short to Battery A short to +B in the solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C12D114 Left Rear Wheel ABS Hold Solenoid Control Circuit Short to Ground or Open An open or short in the solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C12D11C Left Rear Wheel ABS Hold Solenoid Control Circuit Voltage Out of Range
·

A current leak in the solenoid circuit is detected during the self test.

·

The solenoid operation request signal and solenoid operation feedback signal do not match for a certain period of time.


Skid control ECU (brake actuator assembly) Brake
C12D11E Left Rear Wheel ABS Hold Solenoid Control Circuit Resistance Out of Range An abnormal resistance in the solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C12D149 Left Rear Wheel ABS Hold Solenoid Control Internal Electronic Failure An internal malfunction in the solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C12DC12 Left Rear Wheel ABS Release Solenoid Control Circuit Short to Battery A short to +B in the solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C12DC14 Left Rear Wheel ABS Release Solenoid Control Circuit Short to Ground or Open An open or short in the solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C12DC1C Left Rear Wheel ABS Release Solenoid Control Circuit Voltage Out of Range
·

A current leak in the solenoid circuit is detected during the self test.

·

The solenoid operation request signal and solenoid operation feedback signal do not match for a certain period of time.


Skid control ECU (brake actuator assembly) Brake
C12DC1E Left Rear Wheel ABS Release Solenoid Control Circuit Resistance Out of Range An abnormal resistance in the solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C12DC49 Left Rear Wheel ABS Release Solenoid Control Internal Electronic Failure An internal malfunction in the solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake

CAUTION / NOTICE / HINT

NOTICE:

After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMMF Made)>UTILITY


PROCEDURE

1.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for RHD A
for LHD B



A

2.REPLACE BRAKE ACTUATOR ASSEMBLY

B

3.REPLACE BRAKE ACTUATOR ASSEMBLY
2.REPLACE BRAKE ACTUATOR ASSEMBLY

NEXT

END

3.REPLACE BRAKE ACTUATOR ASSEMBLY

NEXT

END