Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMMF Made) › 2020.07–2021.11
RM36W0E _54 Brake _088016 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0435240 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model TMMF Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model TMMF Made)  C14F112  Brake Pressure Control Solenoid "C" Control Circuit Short to Battery  C14F114  Brake Pressure Control Solenoid "C" Control Circuit Short to Ground or Open  C14F11C  Brake Pressure Control Solenoid "C" Control Circuit Voltage Out of Range  C14F11E  Brake Pressure Control Solenoid "C" Control Circuit Resistance Out of Range  C14F149  Brake Pressure Control Solenoid "C" Control Internal Electronic Failure  C14FA12  Brake Pressure Control Solenoid "D" Control Circuit Short to Battery  C14FA14  Brake Pressure Control Solenoid "D" Control Circuit Short to Ground or Open  C14FA1C  Brake Pressure Control Solenoid "D" Control Circuit Voltage Out of Range  C14FA1E  Brake Pressure Control Solenoid "D" Control Circuit Resistance Out of Range  C14FA49  Brake Pressure Control Solenoid "D" Control Internal Electronic Failure  


DESCRIPTION

The ABS solenoid relay and reservoir cut solenoid valves are built into the brake actuator assembly.

When the brakes are operating, the reservoir cut solenoid valves supply brake fluid from the brake master cylinder reservoir assembly to the pump motor as necessary.

When this DTC is stored, the fail-safe function operates and the ABS solenoid relay is turned off to prevent the reservoir cut solenoid valves from operating.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
C14F112 Brake Pressure Control Solenoid "C" Control Circuit Short to Battery A short to +B in the reservoir cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C14F114 Brake Pressure Control Solenoid "C" Control Circuit Short to Ground or Open An open or short in the reservoir cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C14F11C Brake Pressure Control Solenoid "C" Control Circuit Voltage Out of Range
·

A current leak in the reservoir cut solenoid circuit is detected during the self test.

·

The reservoir cut solenoid valve operation request signal and reservoir cut solenoid valve operation feedback signal do not match for a certain period of time.


Skid control ECU (brake actuator assembly) Brake
C14F11E Brake Pressure Control Solenoid "C" Control Circuit Resistance Out of Range An abnormal resistance in the reservoir cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C14F149 Brake Pressure Control Solenoid "C" Control Internal Electronic Failure An internal malfunction in the reservoir cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C14FA12 Brake Pressure Control Solenoid "D" Control Circuit Short to Battery A short to +B in the reservoir cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C14FA14 Brake Pressure Control Solenoid "D" Control Circuit Short to Ground or Open An open or short in the reservoir cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C14FA1C Brake Pressure Control Solenoid "D" Control Circuit Voltage Out of Range
·

A current leak in the reservoir cut solenoid circuit is detected during the self test.

·

The reservoir cut solenoid valve operation request signal and reservoir cut solenoid valve operation feedback signal do not match for a certain period of time.


Skid control ECU (brake actuator assembly) Brake
C14FA1E Brake Pressure Control Solenoid "D" Control Circuit Resistance Out of Range An abnormal resistance in the reservoir cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake
C14FA49 Brake Pressure Control Solenoid "D" Control Internal Electronic Failure An internal malfunction in the reservoir cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake

CAUTION / NOTICE / HINT

NOTICE:

After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMMF Made)>UTILITY


PROCEDURE

1.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for RHD A
for LHD B



A

2.REPLACE BRAKE ACTUATOR ASSEMBLY

B

3.REPLACE BRAKE ACTUATOR ASSEMBLY
2.REPLACE BRAKE ACTUATOR ASSEMBLY

NEXT

END

3.REPLACE BRAKE ACTUATOR ASSEMBLY

NEXT

END