Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD) › 2020.07–2020.09
RM36W0E _59 Vehicle Exterior _088480 DOOR / HATCH _0443172 HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)  INSTALLATION  


PROCEDURE

Hide 53630 1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

a.

Pass the hood lock control cable assembly into the engine compartment.


b.

Engage the grommet.

B594326C02
5.646,2 6.063,2 true 6.094,1.906 6.323,2.104 0.229,0.198 10 true *a
*a Grommet - -



c.

Connect the hood lock control cable assembly to the clamps.


Hide 53601 2.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.
B576027

Connect the hood lock control cable assembly to install the hood lock control lever sub-assembly.


b.

Engage the guide.


Hide 53601 3.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

Hide 55606 4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 53510 5.INSTALL HOOD LOCK ASSEMBLY

a.
B594327

Apply MP grease to the sliding areas of the hood lock assembly.


b.

Engage the guide to connect the hood lock control cable assembly.


c.
B594321C04
1.125,0.646 1.385,0.385 true 1.927,0.74 2.188,0.479 true 1.417,0.26 1.635,0.469 0.219,0.208 10 true *a 2.219,0.365 2.438,0.573 0.219,0.208 10 true *b
*a Clamp
*b Guide


Install the hood lock assembly with the 3 bolts.

Torque:
11.5 N*m (117 kgf*cm, 8 ft.*lbf)


d.

w/ Engine Hood Courtesy Switch:

i.

Engage the gude and clamp.


ii.

Connect the connector.



Hide 53875A 6.INSTALL FRONT FENDER LINER RH (w/ Engine Under Cover Assembly)

Hide 16681A 7.INSTALL RADIATOR UPPER AIR GUIDE PLATE

Hide 8.INSTALL FRONT BUMPER ASSEMBLY

Hide 9.INSTALL FRONT WHEEL RH

Hide 53301 10.INSPECT HOOD SUB-ASSEMBLY

Hide 53301 11.ADJUST HOOD SUB-ASSEMBLY