CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (for HV Model)
Disconnect the H24 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No.
(Symbol) |
Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| H24-5 (B) - H24-17 (GND) | Power source | Ignition switch off | 11 to 14 V |
| H24-6 (IG+) - H24-17 (GND) | Power source (IG) | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| H24-17 (GND) - Body ground | Ground for main power supply | Always | Below 1 Ω |
| H24-26(SHIN) - H24-17(GND) | Driver side seat heater switch HI operation signal | ·
Ignition switch ON ·
Seat heater switch off or on (LO) |
Below 1 V |
·
Ignition switch ON ·
Seat heater switch on (HI) |
11 to 14 V |
CHECK POWER DISTRIBUTION BOX ASSEMBLY
Remove the power distribution box assembly.
for LHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Reconnect the power distribution box assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No.
(Symbol) |
Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| 4G-1 - Body ground | Power source | Ignition switch off | 11 to 14 V |
| 4C-25 - Body ground | Ground | Always | Below 1 Ω |
| 4B-6 - Body ground*1 | Seat heater switch LH signal | Seat heater switch LH off | Below 1 Ω |
| Seat heater switch LH on | 11 to 14 V | ||
| 4B-7 - Body ground*1 | Seat heater switch RH signal | Seat heater switch RH off | Below 1 Ω |
| Seat heater switch RH on | 11 to 14 V | ||
| 4C-39 - Body ground | Power source output (seat heater LH)*1 | Seat heater switch LH off | Below 1 Ω |
| Seat heater switch LH on | 11 to 14 V | ||
| Power source output (seat heater LH)*2 | Ignition switch off | Below 1 Ω | |
| Ignition switch ON | 11 to 14 V | ||
| 4C-40 - Body ground | Power source output (seat heater RH)*1 | Seat heater switch RH off | Below 1 Ω |
| Seat heater switch RH on | 11 to 14 V | ||
| Power source output (seat heater RH)*2 | Ignition switch off | Below 1 Ω | |
| Ignition switch ON | 11 to 14 V |
*1: for ON/OFF Type Seat Heater
*2: for HI/LO Type Seat Heater