Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER (for 3 Door) › from 2020.09
RM36W0E _59 Vehicle Exterior _088302 EXTERIOR PANELS / TRIM _0447294 REAR BUMPER(for 3 Door) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for 3 Door)  DISASSEMBLY  


PROCEDURE

Hide 89348N 1.REMOVE NO. 1 ULTRASONIC SENSOR CLIP (w/ Parking Support Brake System)

Hide 89342A 2.REMOVE REAR CENTER ULTRASONIC SENSOR (w/ Parking Support Brake System)

Hide 89342 3.REMOVE REAR CORNER ULTRASONIC SENSOR (w/ Parking Support Brake System)

Hide 89348S 4.REMOVE REAR CENTER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)

Hide 89348R 5.REMOVE REAR CORNER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)

Hide 6.REMOVE BACK-UP LIGHT ASSEMBLY

Hide 82182 7.REMOVE NO. 2 LUGGAGE ROOM WIRE

a.

w/ Parking Support Brake System:

i.

Disengage the clamps to remove the No. 2 luggage room wire.

B588002



b.

w/o Parking Support Brake System:

i.

Disengage the clamps to remove the No. 2 luggage room wire.

B588001



Hide 81920 8.REMOVE REFLEX REFLECTOR ASSEMBLY LH

a.
B596057

Remove the screw.


b.

Disengage the claw and guide to remove the reflex reflector assembly LH.


Hide 81910 9.REMOVE REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52162B 10.REMOVE NO. 1 REAR BUMPER PLATE

a.
B596058

Disengage the claws.


b.

Disengage the hook to remove the No. 1 rear bumper plate.


Hide 52169C 11.REMOVE REAR BUMPER LOWER COVER

a.
B596059

Disengage the claws.


b.

Disengage the hook to remove the rear bumper lower cover.


Hide 52453 12.REMOVE REAR BUMPER CENTER GUARD

a.

Remove the 3 clips.

B596060


b.

Remove the 2 screws.

B596061


c.

Disengage the claws and guides to remove the rear bumper center guard.


Hide 52576 13.REMOVE REAR BUMPER SIDE RETAINER LH

a.

w/ Blind Spot Monitor System:

i.
B596062

Disengage the wire harness clamps.



b.
B596063

Disengage the clips as shown in the illustration.


c.
B596064

Disengage the claw and guides to remove the rear bumper side retainer LH.


Hide 52575 14.REMOVE REAR BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 16.REMOVE REAR COMBINATION LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52156A 17.REMOVE REAR BUMPER SIDE SUPPORT LH

a.

w/ Blind Spot Monitor System:

i.
B596065

Disengage the wire harness clamp.



b.
B596066

Remove the screw and rear bumper side support LH.


Hide 52155A 18.REMOVE REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.


Hide 52016A 19.REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH

a.
B596067

Remove the 4 bolts and rear bumper arm sub-assembly LH.


Hide 52015A 20.REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.