Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE FRONT BUMPER ASSEMBLY
for 5 Door:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for 5 Door)>REMOVAL
for 3 Door:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for 3 Door)>REMOVAL
2.REMOVE HEADLIGHT ASSEMBLY
|
Protective Tape |
Apply protective tape around the headlight assembly as shown in the illustration.
for TMC Made:
Disengage the clamp and disconnect the 2 connectors.
for TMMF Made:
Disengage the clamp and disconnect the 2 connectors.
Remove the 3 screws.
|
Remove in this Direction |
Remove the headlight assembly as shown in the illustration.