Home › Drivetrain › CLUTCH › CLUTCH PEDAL (for LHD) › from 2020.09
RM36W0E _52 Drivetrain _089426 CLUTCH _0430794 CLUTCH PEDAL(for LHD) A

CLUTCH  CLUTCH PEDAL(for LHD)  INSTALLATION  


PROCEDURE

Hide 31321 1.INSTALL CLUTCH PEDAL PAD

a.

Install the clutch pedal pad to the clutch pedal sub-assembly.


Hide 31395A 2.INSTALL NO. 1 PEDAL SPRING HOOK

a.
C446883

Install the 2 No. 1 pedal spring hooks to the clutch pedal bracket sub-assembly.


Hide 31353 3.INSTALL CLUTCH PEDAL SPRING HOLDER

a.
C446882

Install the clutch pedal spring holder to the clutch pedal sub-assembly.


Hide 31316 4.INSTALL TURN OVER CLUTCH PEDAL SPRING

a.

Install the turn over clutch pedal spring to the clutch pedal sub-assembly and clutch pedal bracket sub-assembly.

NOTICE:

Do not damage the turn over clutch pedal spring .



Hide 89280 5.INSTALL CLUTCH PEDAL STROKE SENSOR ASSEMBLY (for G16E-GTS)

Hide 88280A 6.INSTALL CLUTCH SWITCH ASSEMBLY (except G16E-GTS)

Hide 55107A 7.INSTALL CLUTCH PEDAL SUPPORT ASSEMBLY

a.

for G16-GTS:

i.

Install the clutch pedal support assembly to the vehicle body with the 4 nuts.

Torque:
12.7 N*m (130 kgf*cm, 9 ft.*lbf)


ii.

Engage the clamp to connect the wire harness to the clutch pedal support assembly.


iii.

Connect the clutch pedal stroke sensor assembly connector.



b.

except G16-GTS:

i.

Install the clutch pedal support assembly to the vehicle body with the 4 nuts.

Torque:
12.7 N*m (130 kgf*cm, 9 ft.*lbf)


ii.

Engage the 2 clamps to connect the wire harness to the clutch pedal support assembly.


iii.

Connect the clutch switch assembly connector.



Hide 31453A 8.INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS WITH HOLE PIN

a.
C446888C02
0,0 0,0 false
V100135

MP Grease


Apply MP grease to the clutch master cylinder clevis hole.


b.

Connect the clutch master cylinder assembly to the clutch pedal sub-assembly with the master cylinder push rod clevis with hole pin.

NOTICE:

Install the clevis pin from the left side of the vehicle.



c.

Install a new clip to the master cylinder push rod clevis with hole pin.


Hide 84520 9.INSTALL CLUTCH START SWITCH ASSEMBLY

Hide 55606 11.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 88280A 12.INSPECT CLUTCH START SYSTEM