Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR › 2020.09–2021.11
RM36W0E _53 Suspension _087263 FRONT SUSPENSION _0417615 FRONT STABILIZER BAR A

FRONT SUSPENSION  FRONT STABILIZER BAR  INSTALLATION  


PROCEDURE

Hide 48811 1.INSTALL FRONT STABILIZER BAR

a.

Set the front stabilizer bar to the front suspension crossmember sub-assembly.

NOTICE:

Make sure that the identification mark is positioned on the right side of the vehicle.


C427876C01
4.354,2.635 4.5,3.167 4.5,3.167 4.667,3.167 false 4.75,3.083 5.063,3.24 0.313,0.156 10 false *a
*a Identification Mark - -
V100135

Front of the Vehicle - -



b.
C429655C01
0.927,0.813 1.083,1.01 0.156,0.198 10 true A 2.51,1.396 2.667,1.594 0.156,0.198 10 true A 2.781,0.729 2.938,0.927 0.156,0.198 10 true B 1.448,0.146 1.615,0.313 0.167,0.167 10 true B
V100136

Front of the Vehicle


Install the front stabilizer bar to the front suspension crossmember sub-assembly with the 4 bolts.

Torque:
for TMC Made : 44 N*m (449 kgf*cm, 32 ft.*lbf)
for TMMF Made : 52 N*m (530 kgf*cm, 38 ft.*lbf)

NOTICE:

Temporarily tighten the 4 bolts in the order of (B) and (A) and then fully tighten the 2 bolts in the order of (B) and (A).



Hide 48810 2.INSTALL FRONT STABILIZER LINK ASSEMBLY LH

a.

Install the front stabilizer link assembly LH to the front shock absorber assembly LH with the nut.

Torque:
74 N*m (755 kgf*cm, 55 ft.*lbf)

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.



Hide 48820B 3.INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.