Home › Engine / Hybrid System › G16E-GTS (FUEL) › FUEL TANK › from 2020.09
RM36W0E _51 Engine / Hybrid System _095688 G16E-GTS FUEL _0449366 FUEL TANK A

G16E-GTS FUEL  FUEL TANK  INSTALLATION  


PROCEDURE

Hide 77754B 1.INSTALL CHARCOAL CANISTER OUTLET HOSE

a.

Engage the clamp to install the charcoal canister outlet hose to the fuel tank assembly.


Hide 77100U 2.INSTALL FUEL TANK ASSEMBLY

CAUTION:
A344817

The fuel tank assembly is very heavy. Be sure to follow the procedure described in the repair manual, or the fuel tank assembly may fall off the engine lifter.


a.

Set the fuel tank assembly on an engine lifter.

NOTICE:

Using height adjustment attachments and plate lift attachments, keep the fuel tank assembly horizontal.



b.

Using the engine lifter, slowly raise the fuel tank assembly, and temporarily install the fuel tank assembly, fuel tank band RH and fuel tank band LH with the 4 bolts.


c.
A472031N01
0.635,0.063 0.792,0.26 0.156,0.198 10 true 2 2.635,0.083 2.792,0.281 0.156,0.198 10 true 4 0.667,1.906 0.844,2.094 0.177,0.188 10 true 3 2.677,1.938 2.844,2.125 0.167,0.188 10 true 1

Tighten the 4 bolts in the order shown in the illustration.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)

NOTICE:
·

Be careful not to drop the fuel tank assembly.

·

When installing the fuel tank assembly, tilt it slightly to prevent it from interfering with the surrounding parts.




Hide 77020A 3.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 77226A 4.CONNECT NO. 6 FUEL TANK BREATHER TUBE

a.

Connect the No. 6 fuel tank breather tube.


Hide 77201E 5.CONNECT FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.

Connect the fuel tank filler pipe sub-assembly.


Hide 77213E 6.INSTALL FUEL TANK TO FILLER PIPE HOSE

a.

Install the fuel tank to filler pipe hose to the fuel tank assembly and tighten the hose clamp.


Hide 77209F 7.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Install the fuel tank main tube sub-assembly to the fuel pipe.

Click hereEngine / Hybrid System>G16E-GTS (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 77026A 8.INSTALL NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

a.

Install the No. 1 fuel evaporation tube sub-assembly to the fuel pipe.

Click hereEngine / Hybrid System>G16E-GTS (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 77606 9.INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY

a.

Install the No. 1 fuel tank protector sub-assembly with the 4 clips.


Hide 77642A 10.INSTALL NO. 2 FUEL TANK PROTECTOR

a.

a. Install the No. 2 fuel tank protector with the 4 clips and nut.

Torque:
10.5 N・m (107 kgf・cm, )


Hide 11.INSTALL DIFFERENTIAL CARRIER ASSEMBLY

Hide 77010 12.INSTALL FUEL TANK VENT TUBE ASSEMBLY

Hide 77144 13.INSTALL FUEL PUMP GAUGE RETAINER

Hide 77285R 14.INSTALL NO. 1 FUEL TUBE CLAMP

Hide 58325E 15.INSTALL REAR FLOOR SERVICE HOLE COVER (for RH Side)

Hide 77020A 16.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 17.ADD FUEL