Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR (for G16E-GTS) › from 2020.09
RM36W0E _58 Vehicle Interior _088019 HEATING / AIR CONDITIONING _0449580 COMPRESSOR(for G16E-GTS) A

HEATING / AIR CONDITIONING  COMPRESSOR(for G16E-GTS)  INSTALLATION  


PROCEDURE

Hide 88310 2.INSTALL COMPRESSOR WITH PULLEY ASSEMBLY

a.

Temporarily install the compressor with pulley assembly with the 4 bolts.


b.
I117128N01
1.073,0.208 1.156,0.365 0.083,0.156 10 true 1 1.938,0.198 2.021,0.354 0.083,0.156 10 true 4 1.042,1.802 1.146,1.958 0.104,0.156 10 false 3 1.729,1.813 1.833,1.969 0.104,0.156 10 true 2

Tighten the 4 bolts and install the compressor with pulley assembly in the order shown in the illustration.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


c.

Connect the connector.


Hide 88711 3.CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.

Remove the vinyl tape from the No. 1 cooler refrigerant discharge hose.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the compressor with pulley assembly.

Compressor Oil:

for HFC-134a(R134a):

ND-OIL 8 or equivalent

for (HFO-1234yf(R1234yf):

ND-OIL 12 or equivalent



c.

Install the O-ring to the No. 1 cooler refrigerant discharge hose.

NOTICE:

Keep the O-ring and O-ring fitting surface free of foreign matter.



d.

Connect the No. 1 cooler refrigerant discharge hose to the compressor with pulley assembly with the bolt.

Torque:
9.5 N*m (97 kgf*cm, 84 in.*lbf)


Hide 88704 4.CONNECT SUCTION HOSE SUB-ASSEMBLY

a.

Remove the vinyl tape from the suction hose sub-assembly.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the compressor with pulley assembly.

Compressor Oil:

for HFC-134a(R134a):

ND-OIL 8 or equivalent

for (HFO-1234yf(R1234yf):

ND-OIL 12 or equivalent



c.

Install the O-ring to the suction hose sub-assembly.

NOTICE:

Keep the O-ring and O-ring fitting surface free of foreign matter.



d.

Connect the suction hose sub-assembly to the compressor with pulley assembly with the bolt.

Torque:
9.5 N*m (97 kgf*cm, 84 in.*lbf)


Hide 16361A 5.INSTALL FAN AND GENERATOR V BELT

Hide 51410 6.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 7.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT