884A0
1.INSTALL COOLER CONDENSER ASSEMBLY
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the guides and claws to install the cooler condenser assembly as shown in the illustration.
Do not damage the cooler condenser assembly or radiator assembly when installing the cooler condenser assembly.
If a new cooler condenser assembly is installed, add compressor oil to the cooler condenser assembly as follows.
Add 40 cc (1.35 fl. oz)
for Gasoline Model (HFC-134a(R134a)):
ND-OIL 8 or equivalent
for Gasoline Model (HFO-1234yf(R1234yf)):
ND-OIL 12 or equivalent
for HV Model:
ND-OIL 11 or equivalent
88716A
2.INSTALL COOLER REFRIGERANT LIQUID PIPE A (except 1KR-FE)
Remove the vinyl tape from the cooler refrigerant liquid pipe A and cooler condenser assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the cooler refrigerant liquid pipe A.
for Gasoline Model (HFC-134a(R134a)):
ND-OIL 8 or equivalent
for Gasoline Model (HFO-1234yf(R1234yf)):
ND-OIL 12 or equivalent
for HV Model:
ND-OIL 11 or equivalent
Install the O-ring to the cooler refrigerant liquid pipe A.
Keep the O-rings and O-ring fitting surfaces free from foreign matter.
Connect the cooler refrigerant liquid pipe A to the cooler condenser assembly with the bolt.
88710E
3.INSTALL AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY (for 1KR-FE)
Remove the vinyl tape from the air conditioner tube and accessory assembly and cooler condenser assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the air conditioner tube and accessory assembly.
for HFC-134a(R134a):
ND-OIL 8 or equivalent
for (HFO-1234yf(R1234yf):
ND-OIL 12 or equivalent
Install the O-ring to the air conditioner tube and accessory assembly.
Keep the O-rings and O-ring fitting surfaces free from foreign matter.
Connect the air conditioner tube and accessory assembly to the cooler condenser assembly with the bolt.
88711
4.INSTALL NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the vinyl tape from the No. 1 cooler refrigerant discharge hose and cooler condenser assembly.
Sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 cooler refrigerant discharge hose.
for Gasoline Model (HFC-134a(R134a)):
ND-OIL 8 or equivalent
for Gasoline Model (HFO-1234yf(R1234yf)):
ND-OIL 12 or equivalent
for HV Model:
ND-OIL 11 or equivalent
Install the O-ring to the No. 1 cooler refrigerant discharge hose.
Keep the O-rings and O-ring fitting surfaces free from foreign matter.
Connect the No. 1 cooler refrigerant discharge hose to the cooler condenser assembly with the bolt.
53036C
5.INSTALL FRONT END PANEL MOUNTING BRACKET SUB-ASSEMBLY LH
Engage the guides to install the front end panel mounting bracket sub-assembly LH.
Install the bolt.
53035C
6.INSTALL FRONT END PANEL MOUNTING BRACKET SUB-ASSEMBLY RH
Engage the guides to install the front end panel mounting bracket sub-assembly RH.
16595D
7.INSTALL NO. 1 RADIATOR AIR GUIDE LH
16561D
8.INSTALL NO. 1 RADIATOR TO SUPPORT SEAL (w/ Engine Under Cover Assembly)
16562L
9.INSTALL NO. 2 RADIATOR TO SUPPORT SEAL (w/ Engine Under Cover Assembly)
16681A
10.INSTALL RADIATOR UPPER AIR GUIDE PLATE
52131A
11.INSTALL FRONT BUMPER REINFORCEMENT
52611
12.INSTALL FRONT BUMPER ENERGY ABSORBER
53510
13.INSTALL HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)
53510
14.INSTALL HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch)
86520
15.INSTALL LOW PITCHED HORN ASSEMBLY
Click hereVehicle Exterior>HORN>HORN>INSTALLATION
16.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
for HFC-134a(R134a):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFC-134a(R134a))>REPLACEMENT
for HFO-1234yf(R1234yf):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFO-1234yf(R1234yf))>REPLACEMENT
17. WARM UP ENGINE (for Gasoline Model)
for HFC-134a(R134a):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFC-134a(R134a))>REPLACEMENT
for HFO-1234yf(R1234yf):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFO-1234yf(R1234yf))>REPLACEMENT
18.WARM UP COMPRESSOR (for HV Model)
for HFC-134a(R134a):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFC-134a(R134a))>REPLACEMENT
for HFO-1234yf(R1234yf):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFO-1234yf(R1234yf))>REPLACEMENT
19.INSPECT FOR REFRIGERANT LEAK
for HFC-134a(R134a):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFC-134a(R134a))>REPLACEMENT
for HFO-1234yf(R1234yf):
Click hereVehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT (for HFO-1234yf(R1234yf))>REPLACEMENT