53630
1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY
Pass the hood lock control cable assembly into the engine compartment.
Engage the grommet.
| *a | Grommet | - | - |
Connect the hood lock control cable assembly to the clamps.
53601
2.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Connect the hood lock control cable assembly to install the hood lock control lever sub-assembly.
Engage the guide.
53601
3.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
55606
4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
53510
5.INSTALL HOOD LOCK ASSEMBLY
Apply MP grease to the sliding areas of the hood lock assembly.
Engage the guide to connect the hood lock control cable assembly.
| *a | Clamp |
| *b | Guide |
Install the hood lock assembly with the 3 bolts.
w/ Engine Hood Courtesy Switch:
Engage the gude and clamps.
Connect the connector.
53876A
6.INSTALL FRONT FENDER LINER LH
Use the same procedure as for front fender liner RH.
Click hereVehicle Exterior>WIPER / WASHER>WASHER MOTOR>INSTALLATION
16681A
7.INSTALL RADIATOR UPPER AIR GUIDE PLATE
for 5 Door:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for 5 Door)>REASSEMBLY
for 3 Door:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for 3 Door)>REASSEMBLY
8.INSTALL FRONT BUMPER ASSEMBLY (for 5 Door)
9.INSTALL FRONT BUMPER ASSEMBLY (for 3 Door)
53301
10.INSPECT HOOD SUB-ASSEMBLY
53301
11.ADJUST HOOD SUB-ASSEMBLY