43420
1.REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
43420H
2.REMOVE FRONT DRIVE SHAFT OIL SEAL LH
Using SST, tap out the front drive shaft oil seal LH.
43420H
3.INSTALL FRONT DRIVE SHAFT OIL SEAL LH
Coat the lip of a new front drive shaft oil seal LH with MP grease.
| *a | -0.5 mm to 0.5 mm (-0.0197 to 0.0196 in.) |
Using SST and a hammer, tap in the front drive shaft oil seal LH.
-0.5 mm to 0.5 mm (-0.0197 to 0.0196 in.)
| *a | Correct |
| *b | Incorrect |
| *c | Outer Lip |
Make sure that the outer lip of the front drive shaft oil seal LH is not pinched by SST.
Do not allow foreign matter to attach to the inner lip and outer lip of the front drive shaft oil seal LH.
Do not install the front drive shaft oil seal LH at an angle.
Do not remove the grease from the inner lip and outer lip of the front drive shaft oil seal LH.
Do not damage the lip of the front drive shaft oil seal LH.
43420
4.INSTALL FRONT DRIVE SHAFT ASSEMBLY LH