Home › Drivetrain › EA67F (MANUAL TRANSMISSION / TRANSAXLE) › SHIFT LEVER ASSEMBLY › from 2020.09
RM36W0E _52 Drivetrain _095283 EA67F MANUAL TRANSMISSION / TRANSAXLE _0449594 SHIFT LEVER ASSEMBLY A

EA67F MANUAL TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 33530F 1.INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY

a.

Install the floor shift shift lever assembly to the vehicle body with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


b.

Engage the 4 clamps to connect the wire harness to the floor shift shift lever assembly.


Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C435414C01
2.156,2.302 2.719,1.531 2.719,1.531 2.042,0.844 true 1.917,1.302 2.198,1.438 true 2.063,0.24 2.375,0.438 0.313,0.198 10 false *d 2.76,1.438 3.073,1.635 0.313,0.198 10 false *b 1.365,0.448 1.594,0.656 0.229,0.208 10 false *c 2.198,1.344 2.427,1.552 0.229,0.208 10 false *a
*a Nut
*b Stopper
*c Turn
*d Push


Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, press in the stopper.


b.
C450764C01
0.594,0.427 0.844,0.5 false 1.854,0.271 2.521,0.5 true 1.667,0.156 1.979,0.354 0.313,0.198 10 false *a 0.406,0.292 0.719,0.49 0.313,0.198 10 false *a
*a Stopper


Connect the transmission control shift cable to the floor shift lever assembly, check that the position of the stopper is the same as shown in the illustration.

NOTICE:

Do not forcibly pull the transmission control cable assembly into the cabin.



c.

Connect the transmission control select cable to the floor shift lever assembly, check that the position of the stopper is the same as shown in the illustration.

NOTICE:

Do not forcibly pull the transmission control cable assembly into the cabin.



d.
C450654C01
3.115,1.292 2.771,1.292 true 2.156,1.281 2.156,1.635 true 2.104,1.667 2.302,1.844 0.198,0.177 10 true *a 3.146,1.198 3.344,1.365 0.198,0.167 10 true *b
*a Transmission Control Select Cable
*b Transmission Control Shift Cable


Connect the transmission control shift cable to the floor shift lever assembly.


e.

Connect the transmission control select cable to the floor shift lever assembly with the clip.


Hide 33820B 3.ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY

Hide 58910C 4.INSTALL REAR CONSOLE BOX ASSEMBLY