51410
1.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
51442C
2.REMOVE ENGINE UNDER COVER LH
3.DRAIN MANUAL TRANSAXLE OIL
Remove the manual transmission filler plug and gasket.
Remove the drain plug and gasket to drain the manual transaxle oil.
Install a new gasket and the drain plug.
4.ADD MANUAL TRANSAXLE OIL
| *a | 0 to 0.5 mm (0 to 0.0197 in.) |
Add manual transaxle oil until the oil level is between 0 and 5 mm (0.197 in.) from the bottom lip of the manual transmission filler plug opening.
Toyota Genuine Manual Transmission Gear Oil "LV GL-4 and SAE 75W" or "API GL-4 and SAE 75W"
2.0 liters (2.1 US qts, 1.8 Imp. qts)
2.1 liters (2.2 US qts, 1.8 Imp. qts)
Using manual transaxle oil other than the specified oil may cause abnormal noise or vibration, or damage the transfer of your vehicle.
Install a new gasket and the manual transmission filler plug.
When adding manual transaxle oil, make sure that the vehicle is level.
An excessively large or small amount of manual transaxle oil may cause problems.
After adding manual transaxle oil, drive the vehicle and recheck the oil level.
5.INSPECT FOR OIL LEAK
51442C
6.INSTALL ENGINE UNDER COVER LH
51410
7.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY