Home › Engine / Hybrid System › G16E-GTS (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR › from 2020.09
RM36W0E _51 Engine / Hybrid System _095127 G16E-GTS ENGINE CONTROL _0449863 ENGINE COOLANT TEMPERATURE SENSOR A

G16E-GTS ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89422A 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>G16E-GTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.
A481041

Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.


b.
A481042

Install the engine coolant temperature sensor to the water outlet with a new clip.

NOTICE:
·

If the engine coolant temperature sensor has been struck or dropped, replace it.

·

If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.

·

Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.




c.
A481043

Connect the engine coolant temperature sensor connector.


Hide 2.ADD ENGINE COOLANT

Hide 3.INSPECT FOR COOLANT LEAK

Hide 51410 4.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 5.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>G16E-GTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION