Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM (for eCall) › 2020.09–2021.04
RM36W0E _56 Audio / Visual / Telematics _091907 TELEMATICS _0434308 TELEMATICS SYSTEM(for eCall) C

TELEMATICS  TELEMATICS SYSTEM(for eCall)  B15C111  GNSS Antenna Circuit Short to Ground  B15C113  GNSS Antenna Circuit Open  


DESCRIPTION

These DTCs are stored when a malfunction occurs in the roof antenna assembly circuit.

DTC No. Detection Item DTC Detection Condition Trouble Area
B15C111 GNSS Antenna Circuit Short to Ground Current to the roof antenna assembly is lower than the malfunction threshold for 10 seconds or more when the ignition switch is ON
(Short circuit)
·

Telephone transceiver assembly

·

Roof antenna assembly

·

Antenna cord sub-assembly

·

No. 2 antenna cord sub-assembly

·

No. 8 antenna cord sub-assembly (for 3 Door)


B15C113 GNSS Antenna Circuit Open Current to the roof antenna assembly is higher than the malfunction threshold for 10 seconds or more when the ignition switch is ON
(Open circuit)
·

Telephone transceiver assembly

·

Roof antenna assembly

·

Antenna cord sub-assembly

·

No. 2 antenna cord sub-assembly

·

No. 8 antenna cord sub-assembly (for 3 Door)



WIRING DIAGRAM

E434373E11
5.458,2.615 6.865,2.979 1.406,0.365 10 false Telephone Transceiver Assembly 5.313,0.99 5.927,1.188 0.615,0.198 10 false 1 5.292,1.573 5.906,1.771 0.615,0.198 10 false 1a 5.313,1.208 5.719,1.427 0.406,0.219 10 false D 3.813,0.99 4.427,1.188 0.615,0.198 10 false 2 3.781,1.583 4.396,1.781 0.615,0.198 10 false 2a 3.385,0.99 4,1.188 0.615,0.198 10 false 2 3.354,1.583 3.969,1.781 0.615,0.198 10 false 2a 3.365,1.208 3.604,1.396 0.24,0.188 10 false G 1.885,1.208 2.5,1.406 0.615,0.198 10 false H 2.125,2.156 3.365,2.49 1.24,0.333 10 false No. 2 Antenna Cord Sub-assembly 0.698,2.146 1.552,2.583 0.854,0.438 10 false Roof Antenna Assembly 4.083,2.146 4.979,2.531 0.896,0.385 10 false Antenna Cord Sub-assembly 5.313,1.792 5.719,2.01 0.406,0.219 10 false D 3.813,1.792 4.427,1.99 0.615,0.198 10 false F 3.823,1.208 4.438,1.406 0.615,0.198 10 false F 3.375,1.792 3.615,1.979 0.24,0.188 10 false G 1.885,1.792 2.5,1.99 0.615,0.198 10 false H 1.885,1.01 2.5,1.208 0.615,0.198 10 false 5 1.865,1.583 2.479,1.781 0.615,0.198 10 false 5a 0.115,0.115 1.906,0.677 1.792,0.563 12 false for 5 Door:

E452403E12
6.292,2.292 7.031,2.865 0.74,0.573 10 false Telephone Transceiver Assembly 5.958,0.75 6.573,0.948 0.615,0.198 10 false 1 5.938,1.583 6.552,1.781 0.615,0.198 10 false 1a 5.958,0.938 6.365,1.156 0.406,0.219 10 false D 4.688,0.75 5.302,0.948 0.615,0.198 10 false 2 4.667,1.573 5.281,1.771 0.615,0.198 10 false 2a 4.271,0.75 4.885,0.948 0.615,0.198 10 false 2 4.219,1.573 4.833,1.771 0.615,0.198 10 false 2a 4.24,0.948 4.479,1.135 0.24,0.188 10 false G 1.354,0.938 1.969,1.135 0.615,0.198 10 false H 3.125,2.208 4.365,2.542 1.24,0.333 10 false No. 2 Antenna Cord Sub-assembly 0.417,2.156 1.271,2.594 0.854,0.438 10 false Roof Antenna Assembly 4.948,2.219 5.844,2.604 0.896,0.385 10 false Antenna Cord Sub-assembly 5.958,1.771 6.365,1.99 0.406,0.219 10 false D 4.688,1.781 5.302,1.979 0.615,0.198 10 false F 4.688,0.948 5.302,1.146 0.615,0.198 10 false F 4.24,1.781 4.479,1.969 0.24,0.188 10 false G 1.365,1.792 1.979,1.99 0.615,0.198 10 false H 1.385,0.75 2,0.948 0.615,0.198 10 false 5 1.365,1.594 1.979,1.792 0.615,0.198 10 false 5a 0.125,0.104 1.917,0.667 1.792,0.563 12 false for 3 Door: 1.479,2.188 2.719,2.521 1.24,0.333 10 false No. 8 Antenna Cord Sub-assembly 3.042,1.781 3.656,1.979 0.615,0.198 10 false I 3.042,0.938 3.656,1.135 0.615,0.198 10 false I 2.594,1.792 3.208,1.99 0.615,0.198 10 false J 2.583,0.938 3.198,1.135 0.615,0.198 10 false J 2.563,1.594 3.177,1.792 0.615,0.198 10 false 2a 3,1.594 3.615,1.792 0.615,0.198 10 false 2a 3.042,0.75 3.385,0.948 0.344,0.198 10 false 2 2.583,0.75 2.927,0.948 0.344,0.198 10 false 2

CAUTION / NOTICE / HINT

NOTICE:
·

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Telematics System (for eCall).

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for eCall)>PRECAUTION

·

When replacing the telephone transceiver assembly, make sure to replace it with a new one.



PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Telematics > Clear DTCs
50002 459

Result:
Proceed to
NEXT



NEXT

2.CHECK DTC
2.CHECK DTC
a.

Turn the ignition switch to ON and wait for 10 seconds or more.


b.

Check for DTCs and check that no DTCs are output.

Body Electrical > Telematics > Trouble Codes
50001 459

Result:
Result Proceed to
DTCs are not output A
DTC B15C111 or B15C113 is output B



A

B

3.SYSTEM CHECK
3.SYSTEM CHECK
a.

Check the vehicle specification.


Result:
Result Proceed to
for 5 Door A
for 3 Door B



A

4.CHECK NO. 2 ANTENNA CORD SUB-ASSEMBLY

B

10.CHECK NO. 8 ANTENNA CORD SUB-ASSEMBLY
4.CHECK NO. 2 ANTENNA CORD SUB-ASSEMBLY
a.
E434374C04
1.51,0.042 1.927,0.26 0.417,0.219 1.521,2.063 1.938,2.281 0.417,0.219 2.271,1.375 1.833,1.063 true 0.771,3.219 1.156,2.917 true 2.365,1.333 2.677,1.531 0.313,0.198 10 false 5a 0.542,3.167 0.854,3.365 0.313,0.198 10 false 2a 1.677,2.104 1.833,2.302 0.156,0.198 10 false G 1.688,0.083 1.844,0.281 0.156,0.198 10 false H 0.208,0.125 0.521,0.323 0.313,0.198 10 false *a 0.219,2.063 0.531,2.26 0.313,0.198 10 false *b
*a Front view of wire harness connector
(to Roof Antenna Assembly)
*b Front view of wire harness connector
(to Antenna Cord Sub-assembly)


Disconnect the No. 2 antenna cord sub-assembly from the roof antenna assembly connector.


b.

Disconnect the No. 2 antenna cord sub-assembly from the antenna cord sub-assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H-5 - G-2 Always Below 1 Ω
H-5a - G-2a Always Below 1 Ω
H-5 or G-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.INSPECT ANTENNA CORD SUB-ASSEMBLY

NG

REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY

5.INSPECT ANTENNA CORD SUB-ASSEMBLY
a.
E434417C02
1.49,0.146 1.927,0.417 0.438,0.271 1.479,1.771 1.917,2.042 0.438,0.271 1.865,1.24 2.344,1.469 true 2.313,2.75 2.771,3.052 true 0.177,0.229 0.49,0.427 0.313,0.198 10 false *a 0.271,1.948 0.583,2.146 0.313,0.198 10 false *b 1.667,0.229 2.208,0.469 0.542,0.24 10 false D 1.677,1.844 2.219,2.083 0.542,0.24 10 false F 2.427,1.406 2.969,1.646 0.542,0.24 10 false 1a 2.865,3.031 3.229,3.302 0.365,0.271 10 false 2a
*a Front view of wire harness connector
(to Telephone Transceiver Assembly)
*b Front view of wire harness connector
(to No. 2 Antenna Cord Sub-assembly)


Disconnect the antenna connector from the No. 2 antenna cord sub-assembly.


b.

Disconnect the antenna connector from the telephone transceiver assembly.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
D-1 - F-2 Always Below 1 Ω
D-1a - F-2a Always Below 1 Ω
D-1 or F-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

6.REPLACE ROOF ANTENNA ASSEMBLY

NG

REPLACE ANTENNA CORD SUB-ASSEMBLY

6.REPLACE ROOF ANTENNA ASSEMBLY
a.

Replace the roof antenna assembly with a new or known good one.

HINT:

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>ROOF ANTENNA>REMOVAL



Result:
Proceed to
NEXT



NEXT

7.CLEAR DTC
7.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Telematics > Clear DTCs
50002 459

Result:
Proceed to
NEXT



NEXT

8.CHECK DTC
8.CHECK DTC
a.

Turn the ignition switch to ON and wait for 10 seconds or more.


b.

Check for DTCs and check that no DTCs are output.

Body Electrical > Telematics > Trouble Codes
50001 459

Result:
Result Proceed to
DTCs are not output A
DTC B15C111 or B15C113 is output B



A

END (ROOF ANTENNA ASSEMBLY IS DEFECTIVE)

B

9.REPLACE TELEPHONE TRANSCEIVER ASSEMBLY
9.REPLACE TELEPHONE TRANSCEIVER ASSEMBLY
a.

Replace the telephone transceiver assembly with a new one.

HINT:

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS TRANSCEIVER>REMOVAL



Result:
Proceed to
NEXT



NEXT

10.CHECK NO. 8 ANTENNA CORD SUB-ASSEMBLY
a.
E452663C04
1.51,0.042 1.927,0.26 0.417,0.219 1.521,2.063 1.938,2.281 0.417,0.219 2.271,1.375 1.833,1.063 true 2.938,3.115 2.24,2.948 true 2.365,1.333 2.677,1.531 0.313,0.198 10 false 5a 2.969,3.021 3.281,3.219 0.313,0.198 10 false 2a 1.677,2.104 1.833,2.302 0.156,0.198 10 false J 1.688,0.083 1.844,0.281 0.156,0.198 10 false H 0.208,0.125 0.521,0.323 0.313,0.198 10 false *a 0.219,2.063 0.531,2.26 0.313,0.198 10 false *b
*a Front view of wire harness connector
(to Roof Antenna Assembly)
*b Front view of wire harness connector
(to No. 2 Antenna Cord Sub-assembly)


Disconnect the No. 8 antenna cord sub-assembly from the roof antenna assembly connector.


b.

Disconnect the No. 8 antenna cord sub-assembly from the No. 2 antenna cord sub-assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H-5 - J-2 Always Below 1 Ω
H-5a - J-2a Always Below 1 Ω
H-5 or J-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

11.CHECK NO. 2 ANTENNA CORD SUB-ASSEMBLY

NG

REPLACE NO. 8 ANTENNA CORD SUB-ASSEMBLY

11.CHECK NO. 2 ANTENNA CORD SUB-ASSEMBLY
a.
E452664C03
1.479,0.271 1.896,0.49 0.417,0.219 1.521,2.063 1.938,2.281 0.417,0.219 0.958,1.573 1.146,1.208 true 0.771,3.219 1.156,2.917 true 0.781,1.49 1.094,1.688 0.313,0.198 10 false 2a 0.542,3.167 0.854,3.365 0.313,0.198 10 false 2a 1.677,2.104 1.833,2.302 0.156,0.198 10 false G 1.635,0.302 1.792,0.5 0.156,0.198 10 false I 0.208,0.125 0.521,0.323 0.313,0.198 10 false *a 0.219,2.063 0.531,2.26 0.313,0.198 10 false *b
*a Front view of wire harness connector
(to No. 8 Antenna Cord Sub-assembly)
*b Front view of wire harness connector
(to Antenna Cord Sub-assembly)


Disconnect the No. 2 antenna cord sub-assembly from the No. 8 antenna cord sub-assembly connector.


b.

Disconnect the No. 2 antenna cord sub-assembly from the antenna cord sub-assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I-2 - G-2 Always Below 1 Ω
I-2a - G-2a Always Below 1 Ω
I-2 or G-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

12.INSPECT ANTENNA CORD SUB-ASSEMBLY

NG

REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY

12.INSPECT ANTENNA CORD SUB-ASSEMBLY
a.
E434417C02
1.49,0.146 1.927,0.417 0.438,0.271 1.479,1.771 1.917,2.042 0.438,0.271 1.865,1.24 2.344,1.469 true 2.313,2.75 2.771,3.052 true 0.177,0.229 0.49,0.427 0.313,0.198 10 false *a 0.271,1.948 0.583,2.146 0.313,0.198 10 false *b 1.667,0.229 2.208,0.469 0.542,0.24 10 false D 1.677,1.844 2.219,2.083 0.542,0.24 10 false F 2.427,1.406 2.969,1.646 0.542,0.24 10 false 1a 2.865,3.031 3.229,3.302 0.365,0.271 10 false 2a
*a Front view of wire harness connector
(to Telephone Transceiver Assembly)
*b Front view of wire harness connector
(to No. 2 Antenna Cord Sub-assembly)


Disconnect the antenna connector from the No. 2 antenna cord sub-assembly.


b.

Disconnect the antenna connector from the telephone transceiver assembly.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
D-1 - F-2 Always Below 1 Ω
D-1a - F-2a Always Below 1 Ω
D-1 or F-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

13.REPLACE ROOF ANTENNA ASSEMBLY

NG

REPLACE ANTENNA CORD SUB-ASSEMBLY

13.REPLACE ROOF ANTENNA ASSEMBLY
a.

Replace the roof antenna assembly with a new or known good one.

HINT:

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>ROOF ANTENNA>REMOVAL



Result:
Proceed to
NEXT



NEXT

14.CLEAR DTC
14.CLEAR DTC
a.

Clear the DTCs.

Body Electrical > Telematics > Clear DTCs
50002 459

Result:
Proceed to
NEXT



NEXT

15.CHECK DTC
15.CHECK DTC
a.

Turn the ignition switch to ON and wait for 10 seconds or more.


b.

Check for DTCs and check that no DTCs are output.

Body Electrical > Telematics > Trouble Codes
50001 459

Result:
Result Proceed to
DTCs are not output A
DTC B15C111 or B15C113 is output B



A

END (ROOF ANTENNA ASSEMBLY IS DEFECTIVE)

B

16.REPLACE TELEPHONE TRANSCEIVER ASSEMBLY
16.REPLACE TELEPHONE TRANSCEIVER ASSEMBLY
a.

Replace the telephone transceiver assembly with a new one.

HINT:

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS TRANSCEIVER>REMOVAL



Result:
Proceed to
NEXT



NEXT