Use the same procedure for the RH side and LH side.
The procedure listed below is for the LH side.
73370E
1.INSTALL REAR SEAT OUTER BELT ASSEMBLY
Inspect the rear seat outer belt assembly.
Click hereVehicle Interior>SEAT BELT>REAR SEAT OUTER BELT ASSEMBLY (for 3 Door)>INSPECTION
Engage the guides to temporarily install the rear outer belt assembly.
Temporarily install the 2 bolts.
Tighten bolt (A) and then bolt (B).
Install the shoulder anchor of the rear seat outer belt assembly with the bolt.
|
Protruding Part |
Connect the floor anchor of the rear seat outer belt assembly with the bolt.
Do not allow the floor anchor of the rear seat outer belt assembly to overlap the protruding parts of the vehicle body.
Check that the ELR locks.
This check should be performed with the rear seat outer belt assembly installed to the vehicle.
With the rear seat outer belt assembly installed to the vehicle, check that the belt locks when it is pulled out quickly.
Remove the bolt to disconnect the floor anchor of the rear seat outer belt assembly.
62472A
2.INSTALL INNER ROOF SIDE GARNISH
73370E
3.CONNECT REAR SEAT OUTER BELT ASSEMBLY
|
Protruding Part |
Connect the floor anchor of the rear seat outer belt assembly with the bolt.
Do not allow the floor anchor of the rear seat outer belt assembly to overlap the protruding parts of the vehicle body.
64740C
4.INSTALL DECK TRIM SIDE PANEL ASSEMBLY
62520B
5.INSTALL QUARTER TRIM PANEL ASSEMBLY
73220
6.CONNECT FRONT SEAT OUTER BELT ASSEMBLY
73233
7.INSTALL LAP BELT OUTER ANCHOR COVER
67914
8.INSTALL FRONT DOOR SCUFF PLATE
64716D
9.INSTALL DECK TRIM REAR COVER
64997
10.INSTALL DECK FLOOR BOX LH
64995
11.INSTALL DECK FLOOR BOX RH
58410B
12.INSTALL DECK BOARD ASSEMBLY
64330D
13.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)
72693
14.INSTALL REAR SEAT CUSHION LOCK HOOK
15.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
16.INSTALL REAR SEATBACK ASSEMBLY