The main body ECU (multiplex network body ECU) controls the front fog lights.
for TMC Made 5 Door and for TMMF Made with LED Fog Light
for 3 Door and for TMMF Made with Halogen Fog Light
Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.*1
First, confirm that there is no malfunction in the power integration system. Refer to the How to Proceed with Troubleshooting procedure.
First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this symptom.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CXPI communication malfunctions before troubleshooting this symptom.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
*1: w/ Entry and Start System
Turn the light control switch to the TAIL position.
Turn the front fog light switch on.
Using the GTS, read the Data List.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Front Fog Light Fuse Shut Off Status | Front fog light fuse condition | OFF or ON | OFF: Front fog light fuse not shut off
ON: Front fog light fuse shut off |
·
Light control switch in tail position ·
w/ Front Fog Light |
| Tester Display |
|---|
| Front Fog Light Fuse Shut Off Status |
The Data List value displays "OFF".
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Using the GTS, read the Data List.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Front Fog Light Output Signal | Front fog light output | OFF or ON | OFF: Front fog light is not output
ON: Front fog light is output |
·
Light control switch in tail position ·
w/ Front Fog Light |
| Tester Display |
|---|
| Front Fog Light Output Signal |
Display changes according to the front fog light switch operation.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
for LHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Disconnect the A14*1, A104*2 or A12*3 front fog light assembly LH connector.
*1: for TMC Made 5 Door and for TMMF Made with LED Fog Light
*2: for 3 Door
*3: for TMMF Made with Halogen Fog Light
Turn the front fog light switch off.
Turn the front fog light switch on.
Using the GTS, read the Data List.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Front Fog Light Fuse Shut Off Status | Front fog light fuse condition | OFF or ON | OFF: Front fog light fuse not shut off
ON: Front fog light fuse shut off |
·
Light control switch in tail position ·
w/ Front Fog Light |
The Data List value displays "OFF".
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Disconnect the A15*1, A105*2 or A13*3 front fog light assembly RH connector.
*1: for TMC Made 5 Door and for TMMF Made with LED Fog Light
*2: for 3 Door
*3: for TMMF Made with Halogen Fog Light
Turn the front fog light switch off.
Turn the front fog light switch on.
Using the GTS, read the Data List.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Front Fog Light Fuse Shut Off Status | Front fog light fuse condition | OFF or ON | OFF: Front fog light fuse not shut off
ON: Front fog light fuse shut off |
·
Light control switch in tail position ·
w/ Front Fog Light |
The Data List value displays "OFF".
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Disconnect the A14*1, A104*2 or A12*3 front fog light assembly LH connector.
*1: for TMC Made 5 Door and for TMMF Made with LED Fog Light
*2: for 3 Door
*3: for TMMF Made with Halogen Fog Light
Disconnect the A15*1, A105*2 or A13*3 front fog light assembly RH connector.
*1: for TMC Made 5 Door and for TMMF Made with LED Fog Light
*2: for 3 Door
*3: for TMMF Made with Halogen Fog Light
Disconnect the cable from the negative (-) auxiliary battery terminal.
Disconnect the A86 semiconductor power integration computer connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A14-1 (B) or A86-18 (L) - Body ground | Always | 10 kΩ or higher |
| A15-1 (B) or A86-17 (L) - Body ground | Always | 10 kΩ or higher |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A14-2 (B) or A86-18 (L) - Body ground | Always | 10 kΩ or higher |
| A15-2 (B) or A86-17 (L) - Body ground | Always | 10 kΩ or higher |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A104-2 (B) or A86-18 (L) - Body ground | Always | 10 kΩ or higher |
| A105-2 (B) or A86-17 (L) - Body ground | Always | 10 kΩ or higher |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A12-2 (B) or A86-18 (L) - Body ground | Always | 10 kΩ or higher |
| A13-2 (B) or A86-17 (L) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG