31410
1.INSTALL CLUTCH MASTER CYLINDER ASSEMBLY
Install a new clutch master cylinder gasket to the clutch master cylinder assembly.
Install the clutch master cylinder assembly to the vehicle body with the 2 nuts.
31453A
2.INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS WITH HOLE PIN
31481
3.CONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE
| *a | Torque Wrench Fulcrum Length |
Using a 10 mm union nut wrench, connect the clutch master cylinder to flexible hose tube to the clutch master cylinder assembly.
Do not kink or damage the clutch master cylinder to flexible hose tube.
Do not allow any foreign matter such as dirt or dust to enter the clutch master cylinder to flexible hose tube from the connecting part.
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
When using a union nut wrench (fulcrum length of 22 mm (0.866 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)
31434E
4.CONNECT NO. 1 CLUTCH RESERVOIR HOSE
| *a | View A |
| *b | Front of Vehicle |
| *c | Paint Mark (Front of Vehicle) |
| *d | 0 to 2 mm (0 to 0.0787 in.) |
| *e | Alignment Mark |
Connect the No. 1 clutch reservoir hose to the clutch master cylinder assembly and slide the hose clip to secure it.
Make sure that the alignment mark of the No. 1 clutch reservoir hose is with in the assembly mark on shown in the illustration.
Make sure that the claws of the hose clip are within the location shown in the illustration.
44610
5.INSTALL BRAKE BOOSTER ASSEMBLY
6.BLEED CLUTCH LINE
for C551:
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM (for C551)>BLEEDING
for EC6E:
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM (for EC6E)>BLEEDING
for EA67F:
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM (for EA67F)>BLEEDING
7.INSPECT FOR BRAKE FLUID LEAK
8.INSPECT BRAKE FLUID LEVEL IN RESERVOIR
for G16E-GTS:
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (for Gasoline Model)>ON-VEHICLE INSPECTION
except G16E-GTS:
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID (for Gasoline Model)>ON-VEHICLE INSPECTION
9.INSPECT CLUTCH PEDAL