Home › Engine / Hybrid System › M15A-FXE (FUEL) › FUEL TANK › from 2021.11
RM36W0E _51 Engine / Hybrid System _088661 M15A-FXE FUEL _0427240 FUEL TANK A

M15A-FXE FUEL  FUEL TANK  INSTALLATION  


PROCEDURE

Hide 77277R 1.INSTALL FUEL TANK FILLER PIPE PROTECTOR (for TMMF, TMMCZ Made)

a.

Engage the 3 clamps to install a new fuel tank filler pipe protector to the fuel tank filler pipe sub-assembly.


b.

Engage the 3 claws.


Hide 77277R 2.INSTALL FUEL TANK FILLER PIPE PROTECTOR (for TMC Made)

a.

Engage the 4 clamps to install a new fuel tank filler pipe protector to the fuel tank filler pipe sub-assembly.


b.

Engage the 4 claws.


Hide 77218A 3.INSTALL NO. 3 FUEL TANK FILLER PIPE SUPPORT (for TMMF, TMMCZ Made)

a.

Engage the 2 clamps to install the No. 3 fuel tank filler pipe support to the fuel tank filler pipe sub-assembly.


Hide 77218A 4.INSTALL NO. 3 FUEL TANK FILLER PIPE SUPPORT (for TMC Made)

a.

Engage the 3 clamps to install the No. 3 fuel tank filler pipe support to the fuel tank filler pipe sub-assembly.


Hide 77216A 5.INSTALL NO. 1 FUEL TANK FILLER PIPE SUPPORT (for TMMF, TMMCZ Made)

a.

Engage the 2 clamps to install the No. 1 fuel tank filler pipe support to the fuel tank filler pipe sub-assembly.


Hide 77216A 6.INSTALL NO. 1 FUEL TANK FILLER PIPE SUPPORT (for TMC Made)

a.

Engage the 3 clamps to install the No. 1 fuel tank filler pipe support to the fuel tank filler pipe sub-assembly.


Hide 77217A 7.INSTALL NO. 2 FUEL TANK FILLER PIPE SUPPORT

a.

Engage the 2 claws to install the No. 2 fuel tank filler pipe support to the fuel tank filler pipe sub-assembly.


Hide 77027B 8.INSTALL NO. 1 FUEL EMISSION TUBE SUB-ASSEMBLY

a.

Engage the clamp to install the No. 1 fuel emission tube sub-assembly to the fuel tank assembly.


Hide 77209F 9.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Engage the clamp to install the fuel tank main tube sub-assembly to the fuel tank assembly.


Hide 77100U 10.INSTALL FUEL TANK ASSEMBLY

CAUTION:
A344817

The fuel tank assembly is very heavy. Be sure to follow the procedure described in the repair manual, or the fuel tank assembly may fall off the engine lifter.


a.

Set the fuel tank assembly on an engine lifter.

NOTICE:

Using height adjustment attachments and plate lift attachments, keep the fuel tank assembly horizontal.



b.

Using the engine lifter, slowly raise the fuel tank assembly, and then temporarily install the fuel tank assembly with the 4 bolts.


c.
A465987N01
2.167,0.292 2.323,0.49 0.156,0.198 10 true 2 2.563,1.885 2.719,2.083 0.156,0.198 10 true 4 1.115,0.281 1.292,0.469 0.177,0.188 10 true 3 0.479,1.823 0.646,2.01 0.167,0.188 10 true 1

Tighten the 4 bolts in the order shown in the illustration.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)

NOTICE:
·

Be careful not to drop the fuel tank assembly.

·

When installing the fuel tank assembly, tilt it slightly to prevent it from interfering with the surrounding parts.




d.

Connect the fuel tank breather tube to the fuel tank filler pipe sub-assembly.

Click hereEngine / Hybrid System>M15A-FXE (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 11.INSTALL FUEL TANK FILLER PIPE SUB-ASSEMBLY (for TMMF, TMMCZ Made)

a.

Engage the locations shown in the illustration, and engage the fuel tank filler pipe sub-assembly to the vehicle body.

A466959


b.

Install the bolt.


c.

Engage the 2 clamps.


Hide 12.INSTALL FUEL TANK FILLER PIPE SUB-ASSEMBLY (for TMC Made)

a.

Engage the locations shown in the illustration, and engage the fuel tank filler pipe sub-assembly to the vehicle body.

A465233


b.

Install the bolt.


Hide 77730C 13.CONNECT NO. 2 CHARCOAL CANISTER ASSEMBLY (for TMMF, TMMCZ Made)

a.

Connect the canister air tube from the No. 2 canister.

Click hereEngine / Hybrid System>M15A-FXE (FUEL)>FUEL SYSTEM>PRECAUTION


b.

Engage the clamp to install the No. 1 canister outlet hose sub-assembly to the fuel tank assembly.


Hide 58415Q 14.INSTALL NO. 1 REAR FLOOR BOARD (for TMMF, TMMCZ Made)

Hide 77209F 15.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Connect the fuel tank main tube sub-assembly to the fuel pipe.

Click hereEngine / Hybrid System>M15A-FXE (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 77027B 16.CONNECT NO. 1 FUEL EMISSION TUBE SUB-ASSEMBLY

a.

Connect the No. 1 fuel emission tube sub-assembly to the fuel pipe and slide the clip to secure it.

Click hereEngine / Hybrid System>M15A-FXE (FUEL)>FUEL SYSTEM>PRECAUTION


Hide 77606 17.INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY

a.

Install the No. 1 fuel tank protector sub-assembly to the fuel tank assembly with the 3 clips.


Hide 17410 18.INSTALL FRONT EXHAUST PIPE ASSEMBLY

Hide 51447D 19.INSTALL NO. 4 CENTER ENGINE UNDER COVER (for TMMF, TMMCZ Made)

Hide 51447D 20.INSTALL NO. 4 CENTER ENGINE UNDER COVER (for TMC Made)

Hide 77310A 21.INSTALL FUEL TANK CAP ASSEMBLY

Hide 77020A 22.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 65638 23.INSTALL REAR WHEEL HOUSE LINER LH (for TMMF, TMMCZ Made)

a.

Install the rear fender liner with the grommet and 10 clips.


b.

Install the 2 screws.


Hide 65638 24.INSTALL REAR WHEEL HOUSE LINER LH (for TMC Made)

a.

Install the rear fender liner with the grommet and 5 clips.


b.

Install the 2 screws.


Hide 52592 25.INSTALL REAR BUMPER SIDE SEAL LH (for TMMF, TMMCZ Made)

Hide 26.INSTALL WHEEL ASSEMBLY

Hide 27.ADD FUEL